Comments (11)
What distribution and version of Linux are you using?
from vrn.
Thanks for your reply
The computer is lab's but not mine, I was just told that this one is new and without graphic drivers
I know it was stupid ... I've just installed it and I am installing the CUDA and cuDNN
Please don't close the issue and I will respond you later
from vrn.
I've successfully installed CUDA9.1 and cudnn8.0, but still failed to run
if I run "./run.sh" then there is
./run.sh: line 30: 21726 Segmentation fault (core dumped) th main.lua -model 2D-FAN-300W.t7 -input ../$INPUT/ -detectFaces true -mode generate -output ../$INPUT/ -device gpu -outputFormat txt
ls: cannot access '.txt': No such file or directory
/home/syaoran/torch/install/bin/lua: /home/syaoran/torch/install/share/lua/5.2/trepl/init.lua:389: module 'cunn' not found:No LuaRocks module found for cunn
no field package.preload['cunn']
no file '/home/syaoran/.luarocks/share/lua/5.2/cunn.lua'
no file '/home/syaoran/.luarocks/share/lua/5.2/cunn/init.lua'
no file '/home/syaoran/torch/install/share/lua/5.2/cunn.lua'
no file '/home/syaoran/torch/install/share/lua/5.2/cunn/init.lua'
no file '/home/syaoran/.luarocks/share/lua/5.1/cunn.lua'
no file '/home/syaoran/.luarocks/share/lua/5.1/cunn/init.lua'
no file '/home/syaoran/torch/install/share/lua/5.1/cunn.lua'
no file '/home/syaoran/torch/install/share/lua/5.1/cunn/init.lua'
no file '/home/syaoran/usr/local/torch/install/share/lua/5.1/cunn.lua'
no file '/home/syaoran/usr/local/torch/install/share/lua/5.1/cunn/init.lua'
no file './cunn.lua'
no file '/home/syaoran/usr/local/torch/install/share/luajit-2.1.0-beta1/cunn.lua'
no file '/usr/local/share/lua/5.1/cunn.lua'
no file '/usr/local/share/lua/5.1/cunn/init.lua'
no file '/home/syaoran/.luarocks/lib/lua/5.2/cunn.so'
no file '/home/syaoran/torch/install/lib/lua/5.2/cunn.so'
no file '/home/syaoran/torch/install/lib/cunn.so'
no file '/home/syaoran/.luarocks/lib/lua/5.1/cunn.so'
no file '/home/syaoran/torch/install/lib/lua/5.1/cunn.so'
no file '/home/syaoran/usr/local/torch/install/lib/cunn.so'
no file '/home/syaoran/usr/local/torch/install/lib/lua/5.1/cunn.so'
no file './cunn.so'
no file '/usr/local/lib/lua/5.1/cunn.so'
no file '/usr/local/lib/lua/5.1/loadall.so'
stack traceback:
[C]: in function 'error'
/home/syaoran/torch/install/share/lua/5.2/trepl/init.lua:389: in function 'require'
process.lua:16: in main chunk
[C]: in function 'dofile'
...oran/torch/install/lib/luarocks/rocks/trepl/scm-1/bin/th:150: in main chunk
[C]: in ?
ls: cannot access '.raw': No such file or directory
If i run "sudo ./run.sh" then there is
./run.sh: line 24: th: command not
ls: cannot access '.txt': No such file or directory
./run.sh: line 78: th: command not found
ls: cannot access '.raw': No such file or directory
And here is the my distribution and version of Linux
- Ubuntu 16.04
- NVIDIA GeForce GTX 1080
- CUDA 9.1
- CUDNN 8.0
- python 2.7.12
and here is the output of deviceQuery:
CUDA Device Query (Runtime API) version (CUDART static linking)
Detected 1 CUDA Capable device(s)
Device 0: "GeForce GTX 1080"
CUDA Driver Version / Runtime Version 9.1 / 9.1
CUDA Capability Major/Minor version number: 6.1
Total amount of global memory: 8111 MBytes (8504868864 bytes)
(20) Multiprocessors, (128) CUDA Cores/MP: 2560 CUDA Cores
GPU Max Clock rate: 1835 MHz (1.84 GHz)
Memory Clock rate: 5005 Mhz
Memory Bus Width: 256-bit
L2 Cache Size: 2097152 bytes
Maximum Texture Dimension Size (x,y,z) 1D=(131072), 2D=(131072, 65536), 3D=(16384, 16384, 16384)
Maximum Layered 1D Texture Size, (num) layers 1D=(32768), 2048 layers
Maximum Layered 2D Texture Size, (num) layers 2D=(32768, 32768), 2048 layers
Total amount of constant memory: 65536 bytes
Total amount of shared memory per block: 49152 bytes
Total number of registers available per block: 65536
Warp size: 32
Maximum number of threads per multiprocessor: 2048
Maximum number of threads per block: 1024
Max dimension size of a thread block (x,y,z): (1024, 1024, 64)
Max dimension size of a grid size (x,y,z): (2147483647, 65535, 65535)
Maximum memory pitch: 2147483647 bytes
Texture alignment: 512 bytes
Concurrent copy and kernel execution: Yes with 2 copy engine(s)
Run time limit on kernels: Yes
Integrated GPU sharing Host Memory: No
Support host page-locked memory mapping: Yes
Alignment requirement for Surfaces: Yes
Device has ECC support: Disabled
Device supports Unified Addressing (UVA): Yes
Supports Cooperative Kernel Launch: Yes
Supports MultiDevice Co-op Kernel Launch: Yes
Device PCI Domain ID / Bus ID / location ID: 0 / 5 / 0
Compute Mode:
< Default (multiple host threads can use ::cudaSetDevice() with device simultaneously) >
deviceQuery, CUDA Driver = CUDART, CUDA Driver Version = 9.1, CUDA Runtime Version = 9.1, NumDevs = 1
Result = PASS
from vrn.
As mentioned in the README, CUDA 9 won't work. You need CUDA 7.5 or 8, and CuDNN 5.1.
from vrn.
Oh I'm sorry I'll have a try
Thank you
from vrn.
I've made my CUDA back to 8.0
nvcc: NVIDIA (R) Cuda compiler driver
Copyright (c) 2005-2016 NVIDIA Corporation
Built on Sun_Sep__4_22:14:01_CDT_2016
Cuda compilation tools, release 8.0, V8.0.44
and cudnn back to 5.1 then redo every steps in Installation Example and make sure there's no error message during that but I still failed to run ./run.sh:
if I run "./run.sh" the error message is
syaoran@syaoran:~/Documents/3DMM/vrn$ ./run.sh
./run.sh: line 30: 32001 Segmentation fault (core dumped) th main.lua -model 2D-FAN-300W.t7 -input ../$INPUT/ -detectFaces true -mode generate -output ../$INPUT/ -device gpu -outputFormat txt
ls: cannot access '.txt': No such file or directory
Found Environment variable CUDNN_PATH = /usr/local/cuda/lib64/libcudnn.so.5/home/syaoran/usr/local/torch/install/bin/luajit: ...ran/usr/local/torch/install/share/lua/5.1/trepl/init.lua:389: ...ran/usr/local/torch/install/share/lua/5.1/trepl/init.lua:389: ...oran/usr/local/torch/install/share/lua/5.1/cudnn/ffi.lua:1592: /usr/local/cuda/lib64/libcudnn.so.5: cannot open shared object file: No such file or directory
stack traceback:
[C]: in function 'error'
...ran/usr/local/torch/install/share/lua/5.1/trepl/init.lua:389: in function 'require'
process.lua:17: in main chunk
[C]: in function 'dofile'
...ocal/torch/install/lib/luarocks/rocks/trepl/scm-1/bin/th:150: in main chunk
[C]: at 0x00405d50
ls: cannot access '.raw': No such file or directory
if I run it in MATLAB then the error message is
device =
gpu
/home/syaoran/usr/local/torch/install/bin/luajit: ...ran/usr/local/torch/install/share/lua/5.1/trepl/init.lua:389: ...ran/usr/local/torch/install/share/lua/5.1/trepl/init.lua:389: ...ran/usr/local/torch/install/share/lua/5.1/trepl/init.lua:389: ...sr/local/torch/install/share/lua/5.1/luarocks/loader.lua:117: error loading module 'fb.python.lib' from file '/home/syaoran/usr/local/torch/install/lib/lua/5.1/fb/python/lib.so':
/usr/local/MATLAB/R2016b/sys/os/glnxa64/libstdc++.so.6: version `GLIBCXX_3.4.21' not found (required by /home/syaoran/usr/local/torch/install/lib/lua/5.1/fb/python/lib.so)
stack traceback:
[C]: in function 'error'
...ran/usr/local/torch/install/share/lua/5.1/trepl/init.lua:389: in function 'require'
main.lua:8: in main chunk
[C]: in function 'dofile'
...ocal/torch/install/lib/luarocks/rocks/trepl/scm-1/bin/th:150: in main chunk
[C]: at 0x00405d50
Error using run (line 38)
Failed to run Torch7 script.
but my touch7 seems no problem:
th> torch.Tensor{1,2,3}
1
2
3
[torch.DoubleTensor of size 3]
[0.0003s]
Thank you for always reply, and I wanna say what written in your paper is awesome
from vrn.
The error is saying that it can't find cudnn for some reason (in particular, the file /usr/local/cuda/lib64/libcudnn.so.5
). Are you sure you installed it correctly?
from vrn.
I reinstall the cudnn then copy the file asj.jpg into the scaled folder and there is .raw file in output folder now! (Wow)
BUT it seems that the program didn't work correctly cuz the .raw is empty and there is still error message:
./run.sh:
syaoran@syaoran:~/Documents/3DMM/vrn$ ./run.sh
./run.sh: line 30: 26432 Segmentation fault (core dumped) th main.lua -model 2D-FAN-300W.t7 -input ../$INPUT/ -detectFaces true -mode generate -output ../$INPUT/ -device gpu -outputFormat txt
ls: cannot access '*.txt': No such file or directory
Found Environment variable CUDNN_PATH = /usr/local/cuda/lib64/libcudnn.so.5Processed asj.
Traceback (most recent call last):
File "../vis.py", line 30, in
volRGB = np.stack(((vol > 1) * im[:,:,0],
ValueError: operands could not be broadcast together with shapes (200,192,192) (844,768)
click RUN in MATLAB:
device =
gpu
/home/syaoran/usr/local/torch/install/bin/luajit: ...ran/usr/local/torch/install/share/lua/5.1/trepl/init.lua:389: ...ran/usr/local/torch/install/share/lua/5.1/trepl/init.lua:389: ...ran/usr/local/torch/install/share/lua/5.1/trepl/init.lua:389: ...sr/local/torch/install/share/lua/5.1/luarocks/loader.lua:117: error loading module 'fb.python.lib' from file '/home/syaoran/usr/local/torch/install/lib/lua/5.1/fb/python/lib.so':
/usr/local/MATLAB/R2016b/sys/os/glnxa64/libstdc++.so.6: version `GLIBCXX_3.4.21' not found (required by /home/syaoran/usr/local/torch/install/lib/lua/5.1/fb/python/lib.so)
stack traceback:
[C]: in function 'error'
...ran/usr/local/torch/install/share/lua/5.1/trepl/init.lua:389: in function 'require'
main.lua:8: in main chunk
[C]: in function 'dofile'
...ocal/torch/install/lib/luarocks/rocks/trepl/scm-1/bin/th:150: in main chunk
[C]: at 0x00405d50
Error using run (line 38)
Failed to run Torch7 script.
from vrn.
You can't just copy the image into the scale folder as it has not yet been scaled. If the face is not scaled the results will look very bad. The raw file should be about 6MB if it did anything at all.
Have a look at main.lua
in the face-alignment code. Try executing each line in a th
session to see where it fails. It's probably these lines in utils.lua
, which you can probably remove.
from mpl_toolkits.mplot3d import Axes3D
import matplotlib.pyplot as plt
import matplotlib.patches as patches
from vrn.
You are right, there is error message with "local utils = require 'utils'" and "local opts = require 'opts'(arg)" in main.lua:
local utils = require 'utils'
th> local utils = require 'utils'
...ran/usr/local/torch/install/share/lua/5.1/trepl/init.lua:389: module 'utils' not found:No LuaRocks module found for utils
no field package.preload['utils']
no file '/home/syaoran/.luarocks/share/lua/5.1/utils.lua'
no file '/home/syaoran/.luarocks/share/lua/5.1/utils/init.lua'
no file '/home/syaoran/usr/local/torch/install/share/lua/5.1/utils.lua'
no file '/home/syaoran/usr/local/torch/install/share/lua/5.1/utils/init.lua'
no file '/home/syaoran/.luarocks/share/lua/5.2/utils.lua'
no file '/home/syaoran/.luarocks/share/lua/5.2/utils/init.lua'
no file '/home/syaoran/torch/install/share/lua/5.2/utils.lua'
no file '/home/syaoran/torch/install/share/lua/5.2/utils/init.lua'
no file '/home/syaoran/torch/install/share/lua/5.1/utils.lua'
no file '/home/syaoran/torch/install/share/lua/5.1/utils/init.lua'
no file './utils.lua'
no file '/home/syaoran/usr/local/torch/install/share/luajit-2.1.0-beta1/utils.lua'
no file '/usr/local/share/lua/5.1/utils.lua'
no file '/usr/local/share/lua/5.1/utils/init.lua'
no file '/home/syaoran/.luarocks/lib/lua/5.1/utils.so'
no file '/home/syaoran/usr/local/torch/install/lib/lua/5.1/utils.so'
no file '/home/syaoran/usr/local/torch/install/lib/utils.so'
no file '/home/syaoran/torch/install/lib/utils.so'
no file '/home/syaoran/.luarocks/lib/lua/5.2/utils.so'
no file '/home/syaoran/torch/install/lib/lua/5.2/utils.so'
no file '/home/syaoran/torch/install/lib/lua/5.1/utils.so'
no file './utils.so'
no file '/usr/local/lib/lua/5.1/utils.so'
no file '/usr/local/lib/lua/5.1/loadall.so'
stack traceback:
[C]: in function 'error'
...ran/usr/local/torch/install/share/lua/5.1/trepl/init.lua:389: in function 'require'
[string "local utils = require 'utils'"]:1: in main chunk
[C]: in function 'xpcall'
...ran/usr/local/torch/install/share/lua/5.1/trepl/init.lua:679: in function 'repl'
...ocal/torch/install/lib/luarocks/rocks/trepl/scm-1/bin/th:204: in main chunk
[C]: at 0x00405d50
local opts = require 'opts'(arg)
th> local opts = require 'opts'(arg)
...ran/usr/local/torch/install/share/lua/5.1/trepl/init.lua:389: module 'opts' not found:No LuaRocks module found for opts
no field package.preload['opts']
no file '/home/syaoran/.luarocks/share/lua/5.1/opts.lua'
no file '/home/syaoran/.luarocks/share/lua/5.1/opts/init.lua'
no file '/home/syaoran/usr/local/torch/install/share/lua/5.1/opts.lua'
no file '/home/syaoran/usr/local/torch/install/share/lua/5.1/opts/init.lua'
no file '/home/syaoran/.luarocks/share/lua/5.2/opts.lua'
no file '/home/syaoran/.luarocks/share/lua/5.2/opts/init.lua'
no file '/home/syaoran/torch/install/share/lua/5.2/opts.lua'
no file '/home/syaoran/torch/install/share/lua/5.2/opts/init.lua'
no file '/home/syaoran/torch/install/share/lua/5.1/opts.lua'
no file '/home/syaoran/torch/install/share/lua/5.1/opts/init.lua'
no file './opts.lua'
no file '/home/syaoran/usr/local/torch/install/share/luajit-2.1.0-beta1/opts.lua'
no file '/usr/local/share/lua/5.1/opts.lua'
no file '/usr/local/share/lua/5.1/opts/init.lua'
no file '/home/syaoran/.luarocks/lib/lua/5.1/opts.so'
no file '/home/syaoran/usr/local/torch/install/lib/lua/5.1/opts.so'
no file '/home/syaoran/usr/local/torch/install/lib/opts.so'
no file '/home/syaoran/torch/install/lib/opts.so'
no file '/home/syaoran/.luarocks/lib/lua/5.2/opts.so'
no file '/home/syaoran/torch/install/lib/lua/5.2/opts.so'
no file '/home/syaoran/torch/install/lib/lua/5.1/opts.so'
no file './opts.so'
no file '/usr/local/lib/lua/5.1/opts.so'
no file '/usr/local/lib/lua/5.1/loadall.so'
stack traceback:
[C]: in function 'error'
...ran/usr/local/torch/install/share/lua/5.1/trepl/init.lua:389: in function 'require'
[string "local opts = require 'opts'(arg)"]:1: in main chunk
[C]: in function 'xpcall'
...ran/usr/local/torch/install/share/lua/5.1/trepl/init.lua:679: in function 'repl'
...ocal/torch/install/lib/luarocks/rocks/trepl/scm-1/bin/th:204: in main chunk
[C]: at 0x00405d50
but I'm sure I have installed lua:
syaoran@syaoran:~/Documents/playground$ vim hello.lua
syaoran@syaoran:~/Documents/playground$ lua hello.lua
HelloLUA
And I make sure I have installed every Lua and Python packages in face-aligment/README.md
I've never learn LUA before but I will learn it later, but what do you mean about remove lines in utils.lua?
from vrn.
If it can't find utils.lua
, then you are in the wrong directory. By remove the lines from utils.lua
, I mean just that, remove the lines I listed from the file utils.lua
.
from vrn.
Related Issues (20)
- Maybe Helpful: Ubuntu 18.04 to suxessfull running vrn Howto/run-throuth with Cuda10.1 HOT 2
- benchmark on AFLW2000-3D HOT 2
- ICP on florence face dataset HOT 8
- Warp back onto original image
- API for website demo HOT 2
- ./run.sh using UBUNTU 18.04 failed. How can I solve this? Is there any thing wrong with the directory? HOT 10
- Error in Ubuntu 18.04 HOT 7
- NME HOT 1
- cannot open <2D-FAN-300W.t7> in mode HOT 1
- Are you going to release the train code? HOT 1
- I make a better one [https://github.com/WIKI2020/FacePose_pytorch]
- Running via Octave instead of Matlab HOT 6
- Error on Building thpp HOT 1
- windows 10 successful install? HOT 1
- Improve the result HOT 11
- Fail in main.lua : main.lua:52: '=' expected near 'continue' HOT 11
- Rendering Florence with 20 poses HOT 2
- Results in vrn-docker HOT 1
- Online demo HOT 2
- The face detector failed to find your face.
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from vrn.