5t33z0 / lenovo-t530-hackintosh-opencore Goto Github PK
View Code? Open in Web Editor NEWOpenCore folder for running macOS High Sierra up to Sonoma on the Lenovo ThinkPad T530 Laptop.
License: BSD 3-Clause "New" or "Revised" License
OpenCore folder for running macOS High Sierra up to Sonoma on the Lenovo ThinkPad T530 Laptop.
License: BSD 3-Clause "New" or "Revised" License
XCPM doesn't work in Sonoma but it works in Ventura
machdep.xcpm.mode: 0
I'm using this for my X230, because everything else I'm finding has some sort of bug that I can't find anything about online. This is the only OpenCore config I've found that can boot from the internal drive. Booting the installer (and the internal drive after its fully installed), the bar starts to very slowly crawl after around the 2/3rd mark, slowly filling until it finally boots. While it's in this state, there's no drive activity going by the light. The second boot (first from internal SSD) freezes with the bar only 1/25th filled or so, until after a few minutes or so jumping forward and beginning the second stage of the install. I checked NoTouchID, and it appears to be included in the release EFI, so I don't think it's that. Is there some other thing that I missed or isn't in the config? (I'm new to hackintoshing, I probably missed something obvious.) (Also I want Mojave for compatibility with older jailbreaking tools (existence of iTunes, x86 apps, etc) and newer jailbreaking tools. (most are minimum High Sierra))
Hello,
first of all, thanks for providing such an amazing guide on how to get a Hackintosh on this nice piece of hardware and for keeping it up to date :-)
My first question would be whether it is possible to run this install/the OS with Intel ME disabled. So far I have not read a lot about this and only comments of others but no concrete evidence. And since everyone only asks how to disable the ME with 1vyrain, I have no idea whether you can then re-enable it in case it doesn't work anymore but from what 1vyrain uses it might work.
My second question goes a bit deeper. I am planning on corebooting my T530 (and depending on the outcome of question one I'm also interested in removing/disabling the Intel ME).
Besides that, I'd like to dual-boot this machine, with macOS installed on the mSATA drive and Linux using the regular SATA.
I am fully aware that this is outside of the scope or your guide, but I was interested on your opinion on this topic.
So, I have this issue I don't know how to resolve: my C920 works fine in Photobooth and Facetime on my Lenovo T530. But when using any 3rd party apps like Zoom or Microsoft Teams, the cam won't turn on because I can't grant the apps access to it. The cam is working fine on my desktop pc in Ventura which is even weirder:
Teams and Zoom both ask me to change the Security settings so access to the cam is granted (screenshot from Zoom):
But on the Notebook, the apps don't show up in the Security/Privacy settings :
I tried mapping USB ports which is not a necessity on this system but it had no effect. Changing SIP to EF0F0000 didn't have any effect either. I think the issue is related to this: https://superuser.com/questions/1441270/apps-dont-show-up-in-camera-and-microphone-privacy-settings-in-macbook
I'v tested it in Mojave, Big Sur, Monterey and Ventura – same result. Any suggestions on how to fix this would be highly appreciated.
My Thinkpad T530, i put a Ultrabay Slim SATA 2nd Hdd Hard Drive Caddy Module in my dvdrom space.
In migftw/ThinkPad-T530-Hackintosh clover efi, the hard drive in that place can be read and write right,but in your opencore efi ,it can`t.
The Cataline system can find the hard disk in ,but it can`t read right or format it。
Hope you could find out the reason and let it work。 Thank you very much.
Well,another problem is,when i use your opencore efi,my dp port still can`t find and work,in mini-dp port or in dp port in dock either.
Hi,
the webcam isn't working, do you have some hints to fix it?
@5T33Z0 After spending a lot of time trying to find guides or any info on hibernation in modern hackintosh (OpenCore). I managed to fix hibernation, before these fixes I was only getting a black screen or a restart when trying to wake from hibernation hibernatemode=25
the main problem was some RTC memory regions getting overwritten when starting the machine again, there were other small issues too. I tested with Catalina and Sonoma and its been reliable so far
To fix hibernation you will the kexts HibernationFixup
and RTCMemoryFixup
rtcfx_exclude=80-AB
to boot-argsHibernateMode
to NVRAM in Misc/BootRebuildAppleMemoryMap
to False in Booter/QuirksReservedMemory
entryHibernateSkipsPicker
in Misc/Boot to true for a more seamless hibernation wakeTo fix a black screen that happens after hibernating and waking once and then try to hibernate again
DiscardHibernateMap
Booter quirkOriginally posted by @jozews321 in #43 (comment)
Hello to start off I want to say thankyou so much for your guide! I would never be able to fix sleep withought your binary patching guide! I have a t431s thinkpad and my brightness at boot is always around 75% of the actual brightness even when it says its full. But when I close the lid and sleeps (thx to you :) and I open it the brightness actually goes to 100%. I was wondering if this crossed with the brightness issue on your end as well. When I get home im going to try to use your boot-arg to see if it fixes anything!
when i choose the install monterey from opencore bootloader it just panic and reboot after apple logo .
Hello.
Since banhbaoxamlan's X230 repo hasn't been updated in a while, and had some issues with sleep, I've been running your repo on a X230 with a clean Monterey install.
Everything works flawlessly (including sleep) except for the Trackpoint, which is not working at all (as if it were not recognised).
I looked around the VodooPS2Controller.kext included in this package and it seems to be missing the VoodooPS2Mouse.kext module, might that be the reason for the non-working Trackpoint?
I've read around the other issues, and it seems you're running a modified 1.9.2 version, not sure if the mods required missing the Trackpoint for it to work on Opencore.
Otherwise, could you perhaps point me into the direction of trying to fix it?
Thank you.
First of all: thanks for sharing your EFI.
I tried this on a Lenovo X230 tablet and ran into a problem with my 1366x768 LCD. Half way during the booting it seemed to stuck at the Apple logo and the progress bar at about 50%. With a fresh install of Monterey beta 4 there was an indication that it got further than that: the system started talking about voice activation.
Installing Big Sur and importing from a TimeMachine backup went fine, but after upgrading to Monterey the same thing happened: seemingly stuck during booting. I was in luck that screen sharing was already activated in Big Sur and that it still worked after the upgrade. So I could still use the system with any VNC client!
I went to Settings > Display and found this:
Screen resolution was set at 1280x1080, which my 1366x768 display could not handle. Choosing 'Default for display' or 1024x768 did not help either. After some trial and error I found the culprit: the device_type in the DeviceProperties was set to VGA compatible controller. Removing #device_type made my system boot like it should.
Please remove ot disable the device_type in '#PciRoot(0x0)/Pci(0x2,0x0) 1366x768 px'.
opencore-2021-09-27-194944.txtim having issues installing big sur have the same cpu and wifi card as this guide but dont see any options only a windows drive i set the bios accordingly
I have been able to install Ventura and Sonoma with this EFI, but the system is terribly slow. And I would like to know where to start checking for solutions.
Thanks.
Hello! ive been trying to get Ventura working on the Thinkpad T530. It already has Catalina installed but i would like to go to Ventura.
My specs are listed as :
CPU : i5 3210M
GPU : Intel HD 4000
RAM : 4GB
SSD : Netac S535N 128GB
Display : 1600x900
After doing the instructions shown in the guide. I always stop at this part.
I don't know if i have done anything wrong, and any help would be appreciated!
Im using your clover efi On my x230t with some tweaking, Im running Catalina 10.5.3 with it, my wifi is DW 1510 bcm94322hm8l, I would like to know how to make it work on Big Sur and/or Monterey if I update or clean install, can you please suggest how to do it....
Note: I use this wifi card, because I dual boot MacOs and Windows
Thanks in advance!
I have a T430 and I've been testing Ventura for around a month and these are my findings (More like OCLP findings lol)
AppleIntelCPUPowerManagement.kext
, so the cpu is gonna be stuck in base clock, one solution is injecting the legacy kexts again via OC dortania/OpenCore-Legacy-Patcher@964697a. I couldn't get this to work in my T430, It always kernel panics, some problem with the P-states or something. but I found an alternative. enabling Xcpm, with the help from your guide https://github.com/5T33Z0/Lenovo-T530-Hackintosh-OpenCore/tree/main/ACPI/Enable_XCPM and so far everything has been stable.mediaanalysisd
, it can be fixed with the latest build of RestrictEvents and the boot-arg revblock=media
ipc_control_port_options=0
to fix some crashing problems with Electron apps like DiscordHello, thank you for sharing your great job, in my case after removing whitelist, I installed a dw1510 wifi card (bcm4322), it was ok on Mojave, but I dont see the wifi on Catalina, Big Sur or Monterrey installation of after I install... I read that you can force a kext, unader kernel section but I dont fully understand instructions.... Can please help with it?
Hello, in BIOS on this point:
SATA > SATA Controller Mode: XHCI
I have only two choise:ACPI or Combined.
How to fix it? Install custom bios?
I created this issue to say thank you, thank you for your contribution to the hackintosh user community, you have worked so hard on this repo. I use it on Thinkpad T430 everything works very well and stable, just need create a new SSDT-PM. Could you consider integrating YogaSMC into this EFI? I tried it but YogaSMC only works with Voodoops2controller from acidanthera. When switching to Voodoops2controller from acidanthera, the trackpad does not work well. Looking forward to your response.
Hello how can I configure the sound via HDMI. I only get the sound through the internal speakers.
Many Thanks
Hello dear 5T33Z.
Firstly I would like to thank you for the EFI releases I have been using on my x230 for a year. MacOS from 10.14 to 12.4 started with minimal edits (screen resolution, ssdt-pm, gensmbios). But there is something wrong with the latest releases. I first discovered this by installing Ventura, the macOS installer wrote that my Mac was not supported.
But later I discovered that now even the stable Big Sur refuses to install with the same error:
Can you tell me what might be the problem? Or open for download previous releases. Thanks.
A declarative, efficient, and flexible JavaScript library for building user interfaces.
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google ❤️ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.