This fork has been updated to increase the sensitivity of the default library (see NXP's spec sheet for details).
- 34 First Filter Iterations (default is 6)
- 18 Second Filter Iterations (default is 4)
- Charge Discharge Current 63 μA (default is 16 μA)
- Charge Discharge Time 0.5 μs (Default)
- Electrode Sample Interval 16 ms (Default)
- Proximity Detection is disabled (Default)
- Only sensor pin 0 and 1 enabled (Default is all)
MCU | Tested Works | Doesn't Work | Not Tested | Notes |
---|---|---|---|---|
Atmega328 @ 16MHz | X | |||
Atmega328 @ 12MHz | X | |||
Atmega32u4 @ 16MHz | X | |||
Atmega32u4 @ 8MHz | X | |||
ESP8266 | X | |||
Atmega2560 @ 16MHz | X | |||
ATSAM3X8E | X | |||
ATSAM21D | X | |||
ATtiny85 @ 16MHz | X | |||
ATtiny85 @ 8MHz | X | |||
Intel Curie @ 32MHz | X | |||
STM32F2 | X |
- ATmega328 @ 16MHz : Arduino UNO, Adafruit Pro Trinket 5V, Adafruit Metro 328, Adafruit Metro Mini
- ATmega328 @ 12MHz : Adafruit Pro Trinket 3V
- ATmega32u4 @ 16MHz : Arduino Leonardo, Arduino Micro, Arduino Yun, Teensy 2.0
- ATmega32u4 @ 8MHz : Adafruit Flora, Bluefruit Micro
- ESP8266 : Adafruit Huzzah
- ATmega2560 @ 16MHz : Arduino Mega
- ATSAM3X8E : Arduino Due
- ATSAM21D : Arduino Zero, M0 Pro
- ATtiny85 @ 16MHz : Adafruit Trinket 5V
- ATtiny85 @ 8MHz : Adafruit Gemma, Arduino Gemma, Adafruit Trinket 3V