He copiado y pegado el macro start_print, y he añadido lo siguiente a prusaslicer:
M190 S0 ; Prevents prusaslicer from prepending m190 to the gcode ruining our macro M109 S0 ; Prevents prusaslicer from prepending m109 to the gcode ruining our macro SET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count] ; Provide layer information START_PRINT EXTRUDER_TEMP=[first_layer_temperature[initial_extruder]] BED_TEMP=[first_layer_bed_temperature] PRINT_MIN={first_layer_print_min[0]},{first_layer_print_min[1]} PRINT_MAX={first_layer_print_max[0]},{first_layer_print_max[1]}
A la hora de imprimir un archivo, la cama llega a la temperatura marcada y no hace nada mas.
Si borro las lineas:
M190 S0 ; Prevents prusaslicer from prepending m190 to the gcode ruining our macro M109 S0 ; Prevents prusaslicer from prepending m109 to the gcode ruining our macro
Si que termina de imprimir.
Con orcaslicer tengo el mismo problema, calienta la cama hasta la temperatura objetivo pero no hace nada mas, ni borrando las lineas:
M190 S0 ; Prevents prusaslicer from prepending m190 to the gcode ruining our macro M109 S0 ; Prevents prusaslicer from prepending m109 to the gcode ruining our macro
consigo imprimir