Comments (21)
zewelor
commented on June 23, 2024
So you didn't change anything at it started to appear ? Using phone app for thermostats ? Are thermostats runnign latest firmware ? You could also try to pair them, with the computer https://wiki.archlinux.org/index.php/bluetooth#Pairing
from bt-mqtt-gateway.
Maczuga
commented on June 23, 2024
Same error for me, but with Xiaomi temperature and humidity sensors. Reboot helps for 5min - 12h. Also on Bluez 5.50. Even with pairing.
2019-06-04 14:27:02,680 ERROR bt-mqtt-gw.workers.mithermometer logger.py:48:log_exception - Error during update of mithermometer device 'gabinet' (4C:65:A8:D5:F8:99): BluetoothBackendException
Traceback (most recent call last):
File "/usr/local/lib/python3.5/dist-packages/btlewrap/bluepy.py", line 26, in _func_wrapper
return func(*args, **kwargs)
File "/usr/local/lib/python3.5/dist-packages/btlewrap/bluepy.py", line 84, in write_handle
return self._peripheral.writeCharacteristic(handle, value, True)
File "/usr/local/lib/python3.5/dist-packages/bluepy/btle.py", line 542, in writeCharacteristic
self._writeCmd("%s %X %s\n" % (cmd, handle, binascii.b2a_hex(val).decode('utf-8')))
File "/usr/local/lib/python3.5/dist-packages/bluepy/btle.py", line 302, in _writeCmd
raise BTLEInternalError("Helper not started (did you call connect()?)")
bluepy.btle.BTLEInternalError: Helper not started (did you call connect()?)
The above exception was the direct cause of the following exception:
Traceback (most recent call last):
File "/root/bt-mqtt-gateway/workers/mithermometer.py", line 30, in status_update
ret += self.update_device_state(name, poller)
File "/root/bt-mqtt-gateway/workers/mithermometer.py", line 39, in update_device_state
ret.append(MqttMessage(topic=self.format_topic(name, attr), payload=poller.parameter_value(attr)))
File "/usr/local/lib/python3.5/dist-packages/mithermometer/mithermometer_poller.py", line 136, in parameter_value
self.fill_cache()
File "/usr/local/lib/python3.5/dist-packages/mithermometer/mithermometer_poller.py", line 78, in fill_cache
connection.wait_for_notification(_HANDLE_READ_SENSOR_DATA, Cache, self.ble_timeout)
File "/usr/local/lib/python3.5/dist-packages/btlewrap/bluepy.py", line 26, in _func_wrapper
return func(*args, **kwargs)
File "/usr/local/lib/python3.5/dist-packages/btlewrap/bluepy.py", line 90, in wait_for_notification
self.write_handle(handle, self._DATA_MODE_LISTEN)
File "/usr/local/lib/python3.5/dist-packages/btlewrap/bluepy.py", line 32, in _func_wrapper
raise BluetoothBackendException() from last_error
btlewrap.base.BluetoothBackendException
from bt-mqtt-gateway.
hobbypunk90
commented on June 23, 2024
Hey ho,
i have the same problem but i'm a little bit further 😁
the problem ist, that the bluepy-helper dies and ends up as zombie.
if i have to guess, i would say, that interruptcow kills it by interrupting at a specific point of execution 🤔🤷
but i don't have any idea how to fix that...
from bt-mqtt-gateway.
bistory
commented on June 23, 2024
Same problem here... Data are not sent to HA, only the topics...
Here are the errors :
pi@raspberrypi:~/bt-mqtt-gateway $ sudo ./gateway.py -d
2019-06-26 20:17:44,867 INFO bt-mqtt-gw gateway.py:39:<module> - Starting
2019-06-26 20:17:44,873 DEBUG bt-mqtt-gw.mqtt mqtt.py:23:__init__ - Setting LWT to: lwt_topic
2019-06-26 20:17:48,695 INFO bt-mqtt-gw.workers.mithermometer mithermometer.py:18:_setup - Adding 1 mithermometer devices
2019-06-26 20:17:48,698 DEBUG bt-mqtt-gw.workers.mithermometer mithermometer.py:20:_setup - Adding mithermometer device 'living_room' (58:2D:34:10:40:D0)
2019-06-26 20:17:48,701 DEBUG bt-mqtt-gw.workers_manager workers_manager.py:60:register_workers - Added mithermometer config with a 2 seconds timeout
2019-06-26 20:17:48,703 DEBUG bt-mqtt-gw.workers_manager workers_manager.py:65:register_workers - Added mithermometer worker with 300 seconds interval and a 35 seconds timeout
2019-06-26 20:17:48,732 DEBUG bt-mqtt-gw.mqtt mqtt.py:77:callbacks_subscription - Subscribing to: mithermometer/update_interval
2019-06-26 20:17:48,737 DEBUG bt-mqtt-gw.mqtt mqtt.py:77:callbacks_subscription - Subscribing to: homeassistant/status
2019-06-26 20:17:48,747 DEBUG bt-mqtt-gw.workers_manager workers_manager.py:36:execute - Execution result of command MithermometerWorker.config: [{'topic': 'sensor/mithermometer_living_room_temperature/config', 'payload': '{"unique_id": "bt-mqtt-gateway_mithermometer_living_room_temperature", "state_topic": "mithermometer/living_room/temperature", "device_class": "temperature", "device": {"identifiers": ["58:2D:34:10:40:D0", "bt-mqtt-gateway_mithermometer_living_room"], "manufacturer": "Xiaomi", "model": "LYWSD(CGQ/01ZM)", "name": "Mithermometer Living_Room"}, "name": "mithermometer_living_room_temperature"}'}, {'topic': 'sensor/mithermometer_living_room_humidity/config', 'payload': '{"unique_id": "bt-mqtt-gateway_mithermometer_living_room_humidity", "state_topic": "mithermometer/living_room/humidity", "device_class": "humidity", "device": {"identifiers": ["58:2D:34:10:40:D0", "bt-mqtt-gateway_mithermometer_living_room"], "manufacturer": "Xiaomi", "model": "LYWSD(CGQ/01ZM)", "name": "Mithermometer Living_Room"}, "name": "mithermometer_living_room_humidity"}'}, {'topic': 'sensor/mithermometer_living_room_battery/config', 'payload': '{"unique_id": "bt-mqtt-gateway_mithermometer_living_room_battery", "state_topic": "mithermometer/living_room/battery", "device_class": "battery", "device": {"identifiers": ["58:2D:34:10:40:D0", "bt-mqtt-gateway_mithermometer_living_room"], "manufacturer": "Xiaomi", "model": "LYWSD(CGQ/01ZM)", "name": "Mithermometer Living_Room"}, "name": "mithermometer_living_room_battery"}'}]
2019-06-26 20:17:48,776 DEBUG bt-mqtt-gw.workers_manager workers_manager.py:116:update_all - Updating all workers
2019-06-26 20:17:48,781 INFO bt-mqtt-gw.workers.mithermometer mithermometer.py:39:status_update - Updating 1 mithermometer devices
2019-06-26 20:17:48,784 DEBUG bt-mqtt-gw.workers.mithermometer mithermometer.py:42:status_update - Updating mithermometer device 'living_room' (58:2D:34:10:40:D0)
2019-06-26 20:17:55,718 ERROR bt-mqtt-gw.workers.mithermometer logger.py:48:log_exception - Error during update of mithermometer device 'living_room' (58:2D:34:10:40:D0): BluetoothBackendException
Traceback (most recent call last):
File "/usr/local/lib/python3.7/dist-packages/btlewrap/bluepy.py", line 26, in _func_wrapper
return func(*args, **kwargs)
File "/usr/local/lib/python3.7/dist-packages/btlewrap/bluepy.py", line 84, in write_handle
return self._peripheral.writeCharacteristic(handle, value, True)
File "/usr/local/lib/python3.7/dist-packages/bluepy/btle.py", line 543, in writeCharacteristic
return self._getResp('wr')
File "/usr/local/lib/python3.7/dist-packages/bluepy/btle.py", line 407, in _getResp
resp = self._waitResp(wantType + ['ntfy', 'ind'], timeout)
File "/usr/local/lib/python3.7/dist-packages/bluepy/btle.py", line 368, in _waitResp
raise BTLEGattError("Bluetooth command failed", resp)
bluepy.btle.BTLEGattError: Bluetooth command failed (code: 253, error: Unexpected error code)
The above exception was the direct cause of the following exception:
Traceback (most recent call last):
File "/home/pi/bt-mqtt-gateway/workers/mithermometer.py", line 45, in status_update
ret += self.update_device_state(name, data["poller"])
File "/home/pi/bt-mqtt-gateway/workers/mithermometer.py", line 54, in update_device_state
ret.append(MqttMessage(topic=self.format_topic(name, attr), payload=poller.parameter_value(attr)))
File "/usr/local/lib/python3.7/dist-packages/mithermometer/mithermometer_poller.py", line 136, in parameter_value
self.fill_cache()
File "/usr/local/lib/python3.7/dist-packages/mithermometer/mithermometer_poller.py", line 78, in fill_cache
connection.wait_for_notification(_HANDLE_READ_SENSOR_DATA, Cache, self.ble_timeout)
File "/usr/local/lib/python3.7/dist-packages/btlewrap/bluepy.py", line 26, in _func_wrapper
return func(*args, **kwargs)
File "/usr/local/lib/python3.7/dist-packages/btlewrap/bluepy.py", line 90, in wait_for_notification
self.write_handle(handle, self._DATA_MODE_LISTEN)
File "/usr/local/lib/python3.7/dist-packages/btlewrap/bluepy.py", line 32, in _func_wrapper
raise BluetoothBackendException() from last_error
btlewrap.base.BluetoothBackendException
2019-06-26 20:17:55,752 DEBUG bt-mqtt-gw.workers_manager workers_manager.py:36:execute - Execution result of command MithermometerWorker.status_update: []
from bt-mqtt-gateway.
Maczuga
commented on June 23, 2024
So far rebooting RPI every hour seems to work just fine. At least I am not getting stuck with empty responses.
from bt-mqtt-gateway.
bistory
commented on June 23, 2024
By double-checking, I saw the problem is not the same... I'll have to investigate :s
from bt-mqtt-gateway.
hobbypunk90
commented on June 23, 2024
@Maczuga can you please check the next time if there is a zombie bluepy-helper?
i have a workaround, which works for me 🙈
i'm running the gateway as docker container on a raspberry pi3.
and i check the health status via a check if there is a zombie process.
if it is i restart the container. this seams to work for the last 2 oder 3 days 🤔
docker run -d -l autoheal=true --health-cmd "! top -bn1 | grep -v top | grep bluepy-helper | grep Z" --health-retries 5 --health-interval 10s --restart unless-stopped --name bt-mqtt --network=host -v <config_dir>:/config -e DEBUG=true bt-mqtt-gateway
and
docker run -d --name autoheal --restart=always -v /var/run/docker.sock:/var/run/docker.sock willfarrell/autoheal
i know it only hides the problem, but at this moment, its enough for me😅
from bt-mqtt-gateway.
StefanoMarchesi
commented on June 23, 2024
Same problem here, but even more frequently, I can't get data most of the time, the only way to get it is to put the thermometer in pairing mode and it works for some seconds
2019-06-27 14:13:02,509 INFO bt-mqtt-gw.workers.mithermometer mithermometer.py:39:status_update - Updating 1 mithermometer devices
2019-06-27 14:13:02,515 DEBUG bt-mqtt-gw.workers.mithermometer mithermometer.py:42:status_update - Updating mithermometer device 'bed_room' (4C:65:A8:DD:37:C7)
2019-06-27 14:13:26,259 ERROR bt-mqtt-gw.workers.mithermometer logger.py:48:log_exception - Error during update of mithermometer device 'bed_room' (4C:65:A8:DD:37:C7): BluetoothBackendException
Traceback (most recent call last):
File "/usr/local/lib/python3.5/dist-packages/btlewrap/bluepy.py", line 26, in _func_wrapper
return func(*args, **kwargs)
File "/usr/local/lib/python3.5/dist-packages/btlewrap/bluepy.py", line 55, in connect
self._peripheral = Peripheral(mac, iface=iface)
File "/usr/local/lib/python3.5/dist-packages/bluepy/btle.py", line 391, in init
self._connect(deviceAddr, addrType, iface)
File "/usr/local/lib/python3.5/dist-packages/bluepy/btle.py", line 439, in _connect
raise BTLEDisconnectError("Failed to connect to peripheral %s, addr type: %s" % (addr, addrType), rsp)
bluepy.btle.BTLEDisconnectError: Failed to connect to peripheral 4C:65:A8:DD:37:C7, addr type: public
The above exception was the direct cause of the following exception:
Traceback (most recent call last):
File "/home/osmc/bt-mqtt-gateway/workers/mithermometer.py", line 45, in status_update
ret += self.update_device_state(name, data["poller"])
File "/home/osmc/bt-mqtt-gateway/workers/mithermometer.py", line 54, in update_device_state
ret.append(MqttMessage(topic=self.format_topic(name, attr), payload=poller.parameter_value(attr)))
File "/usr/local/lib/python3.5/dist-packages/mithermometer/mithermometer_poller.py", line 136, in parameter_value
self.fill_cache()
File "/usr/local/lib/python3.5/dist-packages/mithermometer/mithermometer_poller.py", line 60, in fill_cache
self.firmware_version()
File "/usr/local/lib/python3.5/dist-packages/mithermometer/mithermometer_poller.py", line 109, in firmware_version
with self._bt_interface.connect(self._mac) as connection:
File "/usr/local/lib/python3.5/dist-packages/btlewrap/base.py", line 44, in enter
self._backend.connect(self._mac)
File "/usr/local/lib/python3.5/dist-packages/btlewrap/bluepy.py", line 32, in _func_wrapper
raise BluetoothBackendException() from last_error
btlewrap.base.BluetoothBackendException
2019-06-27 14:13:26,321 DEBUG bt-mqtt-gw.workers_manager workers_manager.py:36:execute - Execution result of command MithermometerWorker.status_update: []
2019-06-27 14:18:02,387 INFO bt-mqtt-gw.workers.mithermometer mithermometer.py:39:status_update - Updating 1 mithermometer devices
2019-06-27 14:18:02,394 DEBUG bt-mqtt-gw.workers.mithermometer mithermometer.py:42:status_update - Updating mithermometer device 'bed_room' (4C:65:A8:DD:37:C7)
2019-06-27 14:18:18,986 ERROR bt-mqtt-gw.workers.mithermometer logger.py:48:log_exception - Error during update of mithermometer device 'bed_room' (4C:65:A8:DD:37:C7): BluetoothBackendException
Traceback (most recent call last):
File "/usr/local/lib/python3.5/dist-packages/btlewrap/bluepy.py", line 26, in _func_wrapper
return func(*args, **kwargs)
File "/usr/local/lib/python3.5/dist-packages/btlewrap/bluepy.py", line 55, in connect
self._peripheral = Peripheral(mac, iface=iface)
File "/usr/local/lib/python3.5/dist-packages/bluepy/btle.py", line 391, in init
self._connect(deviceAddr, addrType, iface)
File "/usr/local/lib/python3.5/dist-packages/bluepy/btle.py", line 439, in _connect
raise BTLEDisconnectError("Failed to connect to peripheral %s, addr type: %s" % (addr, addrType), rsp)
bluepy.btle.BTLEDisconnectError: Failed to connect to peripheral 4C:65:A8:DD:37:C7, addr type: public
The above exception was the direct cause of the following exception:
Traceback (most recent call last):
File "/home/osmc/bt-mqtt-gateway/workers/mithermometer.py", line 45, in status_update
ret += self.update_device_state(name, data["poller"])
File "/home/osmc/bt-mqtt-gateway/workers/mithermometer.py", line 54, in update_device_state
ret.append(MqttMessage(topic=self.format_topic(name, attr), payload=poller.parameter_value(attr)))
File "/usr/local/lib/python3.5/dist-packages/mithermometer/mithermometer_poller.py", line 136, in parameter_value
self.fill_cache()
File "/usr/local/lib/python3.5/dist-packages/mithermometer/mithermometer_poller.py", line 60, in fill_cache
self.firmware_version()
File "/usr/local/lib/python3.5/dist-packages/mithermometer/mithermometer_poller.py", line 109, in firmware_version
with self._bt_interface.connect(self._mac) as connection:
File "/usr/local/lib/python3.5/dist-packages/btlewrap/base.py", line 44, in enter
self._backend.connect(self._mac)
File "/usr/local/lib/python3.5/dist-packages/btlewrap/bluepy.py", line 32, in _func_wrapper
raise BluetoothBackendException() from last_error
btlewrap.base.BluetoothBackendException
2019-06-27 14:18:19,020 DEBUG bt-mqtt-gw.workers_manager workers_manager.py:36:execute - Execution result of command MithermometerWorker.status_update: []
from bt-mqtt-gateway.
ozczecho
commented on June 23, 2024
I had the same error as @StefanoMarchesi. After trying a few things the following worked for me.
Running sudo hcitool lescan a few times rediscovered the miflora devices and then the bt-mqtt-gateway started working again...
from bt-mqtt-gateway.
ronytomen
commented on June 23, 2024
I'm wondering if an update occurred to a bluetooth related system package or even the kernel. I didn't have these issues and now I have them. Unfortunately I can't seem to pin point the time of the update nor the suspect package and version.
from bt-mqtt-gateway.
joselito11
commented on June 23, 2024
@zewelor gateway is stopping every day! It wont even last 24 hours. When it stops, then only help is restart NUC. Command sudo systemctl restart bt-mqtt-gatewaycause is to restart every few seconds:
-- Unit bt-mqtt-gateway.service has finished shutting down.
Aug 06 14:07:12 w systemd[1]: Started Bluetooth MQTT gateway.
-- Subject: Unit bt-mqtt-gateway.service has finished start-up
-- Defined-By: systemd
-- Support: http://www.ubuntu.com/support
--
-- Unit bt-mqtt-gateway.service has finished starting up.
--
-- The start-up result is RESULT.
Aug 06 14:07:13 w gateway.py[16522]: 14:07:13 Starting
Aug 06 14:07:14 w gateway.py[16522]: 02:07:14 PM Adding 2 miflora devices
Aug 06 14:07:14 w gateway.py[16522]: 02:07:14 PM Fatal error while executing worker command: BTLEManagementError
Aug 06 14:07:14 w gateway.py[16522]: Traceback (most recent call last):
Aug 06 14:07:14 w gateway.py[16522]: File "/home/w/bt-mqtt-gateway/gateway.py", line 59, in <module>
Aug 06 14:07:14 w gateway.py[16522]: raise e
Aug 06 14:07:14 w gateway.py[16522]: File "/home/w/bt-mqtt-gateway/gateway.py", line 49, in <module>
Aug 06 14:07:14 w gateway.py[16522]: mqtt.publish(_WORKERS_QUEUE.get(timeout=10).execute())
Aug 06 14:07:14 w gateway.py[16522]: File "/home/w/bt-mqtt-gateway/workers_manager.py", line 34, in execute
Aug 06 14:07:14 w gateway.py[16522]: messages = self._callback(*self._args)
Aug 06 14:07:14 w gateway.py[16522]: File "/home/w/bt-mqtt-gateway/workers/toothbrush_homeassistant.py", line 104, in status_update
Aug 06 14:07:14 w gateway.py[16522]: devices = scanner.scan(5.0)
Aug 06 14:07:14 w gateway.py[16522]: File "/usr/local/lib/python3.6/dist-packages/bluepy/btle.py", line 852, in scan
Aug 06 14:07:14 w gateway.py[16522]: self.start(passive=passive)
Aug 06 14:07:14 w gateway.py[16522]: File "/usr/local/lib/python3.6/dist-packages/bluepy/btle.py", line 790, in start
Aug 06 14:07:14 w gateway.py[16522]: self._mgmtCmd("le on")
Aug 06 14:07:14 w gateway.py[16522]: File "/usr/local/lib/python3.6/dist-packages/bluepy/btle.py", line 312, in _mgmtCmd
Aug 06 14:07:14 w gateway.py[16522]: raise BTLEManagementError("Failed to execute management command '%s'" % (cmd), rsp)
Aug 06 14:07:14 w gateway.py[16522]: bluepy.btle.BTLEManagementError: Failed to execute management command 'le on' (code: 17, error: Invalid Index)
Aug 06 14:07:15 w systemd[1]: bt-mqtt-gateway.service: Main process exited, code=exited, status=1/FAILURE
Aug 06 14:07:15 w systemd[1]: bt-mqtt-gateway.service: Failed with result 'exit-code'.
Aug 06 14:07:15 w systemd[1]: bt-mqtt-gateway.service: Service hold-off time over, scheduling restart.
Aug 06 14:07:15 w systemd[1]: bt-mqtt-gateway.service: Scheduled restart job, restart counter is at 570.
-- Subject: Automatic restarting of a unit has been scheduled
-- Defined-By: systemd
-- Support: http://www.ubuntu.com/support
--
-- Automatic restarting of the unit bt-mqtt-gateway.service has been scheduled, as the result for
-- the configured Restart= setting for the unit.
Aug 06 14:07:15 w systemd[1]: Stopped Bluetooth MQTT gateway.
-- Subject: Unit bt-mqtt-gateway.service has finished shutting down
-- Defined-By: systemd
-- Support: http://www.ubuntu.com/support
--
-- Unit bt-mqtt-gateway.service has finished shutting down.
Aug 06 14:07:15 w systemd[1]: Started Bluetooth MQTT gateway.
-- Subject: Unit bt-mqtt-gateway.service has finished start-up
-- Defined-By: systemd
-- Support: http://www.ubuntu.com/support
--
-- Unit bt-mqtt-gateway.service has finished starting up.
--
-- The start-up result is RESULT.
Aug 06 14:07:16 w gateway.py[16569]: 14:07:16 Starting
Aug 06 14:07:18 w gateway.py[16569]: 02:07:18 PM Adding 2 miflora devices
Aug 06 14:07:18 w gateway.py[16569]: 02:07:18 PM Fatal error while executing worker command: BTLEManagementError
Aug 06 14:07:18 w gateway.py[16569]: Traceback (most recent call last):
Aug 06 14:07:18 w gateway.py[16569]: File "/home/w/bt-mqtt-gateway/gateway.py", line 59, in <module>
Aug 06 14:07:18 w gateway.py[16569]: raise e
Aug 06 14:07:18 w gateway.py[16569]: File "/home/w/bt-mqtt-gateway/gateway.py", line 49, in <module>
Aug 06 14:07:18 w gateway.py[16569]: mqtt.publish(_WORKERS_QUEUE.get(timeout=10).execute())
Aug 06 14:07:18 w gateway.py[16569]: File "/home/w/bt-mqtt-gateway/workers_manager.py", line 34, in execute
Aug 06 14:07:18 w gateway.py[16569]: messages = self._callback(*self._args)
Aug 06 14:07:18 w gateway.py[16569]: File "/home/w/bt-mqtt-gateway/workers/toothbrush_homeassistant.py", line 104, in status_update
Aug 06 14:07:18 w gateway.py[16569]: devices = scanner.scan(5.0)
Aug 06 14:07:18 w gateway.py[16569]: File "/usr/local/lib/python3.6/dist-packages/bluepy/btle.py", line 852, in scan
Aug 06 14:07:18 w gateway.py[16569]: self.start(passive=passive)
Aug 06 14:07:18 w gateway.py[16569]: File "/usr/local/lib/python3.6/dist-packages/bluepy/btle.py", line 790, in start
Aug 06 14:07:18 w gateway.py[16569]: self._mgmtCmd("le on")
Aug 06 14:07:18 w gateway.py[16569]: File "/usr/local/lib/python3.6/dist-packages/bluepy/btle.py", line 312, in _mgmtCmd
Aug 06 14:07:18 w gateway.py[16569]: raise BTLEManagementError("Failed to execute management command '%s'" % (cmd), rsp)
Aug 06 14:07:18 w gateway.py[16569]: bluepy.btle.BTLEManagementError: Failed to execute management command 'le on' (code: 17, error: Invalid Index)
Aug 06 14:07:18 w systemd[1]: bt-mqtt-gateway.service: Main process exited, code=exited, status=1/FAILURE
Aug 06 14:07:18 w systemd[1]: bt-mqtt-gateway.service: Failed with result 'exit-code'.
Aug 06 14:07:18 w systemd[1]: bt-mqtt-gateway.service: Service hold-off time over, scheduling restart.
Aug 06 14:07:18 w systemd[1]: bt-mqtt-gateway.service: Scheduled restart job, restart counter is at 571.
-- Subject: Automatic restarting of a unit has been scheduled
-- Defined-By: systemd
-- Support: http://www.ubuntu.com/support
--
-- Automatic restarting of the unit bt-mqtt-gateway.service has been scheduled, as the result for
-- the configured Restart= setting for the unit.
Aug 06 14:07:18 w systemd[1]: Stopped Bluetooth MQTT gateway.
-- Subject: Unit bt-mqtt-gateway.service has finished shutting down
-- Defined-By: systemd
-- Support: http://www.ubuntu.com/support
--
-- Unit bt-mqtt-gateway.service has finished shutting down.
Aug 06 14:07:18 w systemd[1]: Started Bluetooth MQTT gateway.
-- Subject: Unit bt-mqtt-gateway.service has finished start-up
-- Defined-By: systemd
-- Support: http://www.ubuntu.com/support
--
-- Unit bt-mqtt-gateway.service has finished starting up.
--
-- The start-up result is RESULT.
^C
Command sudo hciconfig hci0 reset is no go: Can't get device info: No such device
Something is breaking bluetooth, because command sudo hcitool lescan says: Could not open device: No such device. It works if I restart the whole server on nuc. Where can I search for the problem?
Before I had Monitor, also for scanning bluetooth devices, wich has been working non stop
from bt-mqtt-gateway.
joselito11
commented on June 23, 2024
@zewelor Every day after about 8hours of running gateway or at midnight it stops working. Gateway start to restart non stop. Any suggestion? I deleted now miflora, and only use toothbrush
from bt-mqtt-gateway.
zewelor
commented on June 23, 2024
Looks like this issue: IanHarvey/bluepy#190 (comment) . Im not linux bluetooth stack expert, so I dont have any ideas about this. Maybe some workers combination, doesnt want to work together. Maybe you could write down worker which are causing problems. Except of some bluetooth drivers / stack problems, it might be that some libs doesnt free interface correctly, or something should need to wait longer before pooling bluetooth data.
from bt-mqtt-gateway.
joselito11
commented on June 23, 2024
I installed gateway on 2 raspberrys, one with kodi, one with openmediavault, and it is now 1day 1hour up! With 2 workers: oralb and miflora! This was not possible on intel nuc(ubuntu server, docker, HA)!
from bt-mqtt-gateway.
zewelor
commented on June 23, 2024
@joselito11 On NUC with HA, did you usd any bluetooth integration in HA ? Or maybe bluetooth drivers on NUC are just broken, or needs kernel upgrade etc ?
from bt-mqtt-gateway.
joselito11
commented on June 23, 2024
I first used bletooth tracker from HA, for miflora. Few day later I found your script. I have updated linux firmware for kernel? But for bluetooth drivers I found only old post for ubuntu 16.04, so I was not able to update.
from bt-mqtt-gateway.
Poeschl
commented on June 23, 2024
Having the same issue on a Raspberry Pi Zero with the latest raspberian buster.
Running on the newest bluepy version. Can I do anything to help?
from bt-mqtt-gateway.
jasoncook-fr
commented on June 23, 2024
Hello. Using the bluepy module, I was struggling with a similar issue for a little while myself. I found a way around it thanks to the hints at this thread. On a raspberry zero (as central) receiving sensor data from an esp32 (peripheral). When I power off the ESP the Raspberry gets the initial BTLEDisconnectError then "BTLEInternalError: Helper not started (did you call connect()?)" Then exit.
I got around these errors and managed to automatically reconnect by doing the following. Not terribly elegant. But a start. Seems to be working just fine now.
import binascii
import struct
import time
from bluepy.btle import UUID, Peripheral, BTLEDisconnectError, BTLEInternalError
adc_uuid = UUID(0x2A6E)
p = Peripheral()
p.connect("bt:ma:ca:dd:re:ss", "public")
def main():
print("connecting...")
ch = p.getCharacteristics(uuid=adc_uuid)[0]
if (ch.supportsRead()):
while 1:
try:
val = binascii.b2a_hex(ch.read())
val = binascii.unhexlify(val)
val = struct.unpack('<h', val)[0]
print str(val)
time.sleep(.01)
except BTLEDisconnectError:
print "Device disconnected!"
continue
except BTLEInternalError:
print "internal error... ignoring"
time.sleep(.5)
print "attempting to reconnect..."
p.connect("bt:ma:ca:dd:re:ss", "public")
ch = p.getCharacteristics(uuid=adc_uuid)[0]
if (ch.supportsRead()):
continue
else:
"no connection!!!"
if __name__ == '__main__':
main() from bt-mqtt-gateway.
MissingDLL
commented on June 23, 2024
I do also phase the same issue. Any progress on this?
from bt-mqtt-gateway.
ajayjohn
commented on June 23, 2024
Same here. Have a Raspberry Pi Zero with dietpi running nothing else but bt-mqtt-gateway.
How can I help?
from bt-mqtt-gateway.
FaserF
commented on June 23, 2024
08:30:51 Error during update of thermostat device 'Bad' (00:1A:22:0A:F7:66): BTLEDisconnectError
08:31:23 Execution of command ThermostatWorker.status_update timed out after 35 seconds
08:31:48 Updating 2 thermostat devices
Same issue. Raspberry Pi 4
Any idea?
from bt-mqtt-gateway.
Related Issues (20)
- node_id = mac.replace(":", "-") = AttributeError: 'dict' object has no attribute 'replace' HOT 1
- Does it work with ESPHome?
- Problem with negative temperature / signed values HOT 1
- Gateway not starting as systemctl service HOT 2
- solved: Type error HOT 1
- hardware compatibility HOT 13
- Clarify why this needs to be run in a virtual environment HOT 1
- null values from LYWSD03MMC HOT 5
- blescanmulti worker not publishing to MQTT
- Systemd Installation like in README does not work, service.sh might have superfluous sudo
- Error message if bt-mqtt-gateway is started as home assistant addon HOT 8
- Support for MQTT climate hold and away modes has been removed in HA. HOT 2
- Missing MQTT messages HOT 2
- Anyway to setup on qnap?
- Docker configure.yaml HOT 1
- maybe use eq3btsmart to modernize eq3 thermostat handling? HOT 2
- 100% cpu load from bluepy-helper HOT 2
- Linak Desk Set commands
- Please, Delete this issue
- README venv installation instructions are incorrect
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from bt-mqtt-gateway.