zappanaut / usb-atx-ctrl Goto Github PK

Hi
Thank you for making this available. I've ordered 5 boards from JLCPCB and it came to $10.99 including shipping to Denmark. I'm a software guy and I've never attempted to build anything like this, so I have a fun challenge ahead of my trying to solder the parts and get everything working.

A couple of questions

1. Am I right in assuming that I can just hook up pretty much any number of these through a USB hub?

2. In this picture you've got a 3.3v and a ground hooked up to J2. Where are you pulling those from?

3. In the picture it looks like a bracket from a network card. Do you know which card it came from, since it looks like the holes line up?

4. Any recommendation for a cheap place to buy the parts from the BOM?

Thank you
Morten

Hello!

I was able to sucessfully build it but the LED's aren't working so I wanted to see which LED's you used in yours. Also I setup my override file very similar to yours but the icons for the power and HDD aren't working, do you know what I might be doing wrong? Are they related to the LED's not lighting up?

I want some of the these PCBs, but you don't sell them, or?
Is it possible that you can provide instructions on how we can order the PCB from PCBWay https://www.pcbway.com/

PCBWay offers also to share the Project, so that others can easily order it. https://www.pcbway.com/project/

I am looking to place an order through JLCPCB. In pikvm/pikvm#433 it was mentioned that costs were low. Is that only low if you solder everything yourself? I am not sure if I was inputting information correctly, but with assembly costs, it ended up being close to $70 USD.

Am I missing something?
Thanks