Info not always updating about frskytelemetryscript HOT 18 CLOSED

Hi, it's just the audio or even the flight mode on the display is not updated!

from frskytelemetryscript.

from frskytelemetryscript.

I've seen this issue with a defective or slow SD card, can you rule this out with a class 10 high performance card?

Usually as soon as you arm telemetry gets really slow

from frskytelemetryscript.

from frskytelemetryscript.

I meant on the pixhawk side, as soon as you arm ardupilot starts logging to the SD card and the frsky telemetry slows down or freezes, this is a known issues with less than perfect SD

from frskytelemetryscript.

Ah. Would that affect other devices that use telemetry? I have an OSD that communicates through MavLink and that is updating properly.

from frskytelemetryscript.

I've seen it on frsky only.
Does it work ok before arming and then after arming is less responsive?

from frskytelemetryscript.

from frskytelemetryscript.

Mhmm, just to be sure would you switch card on the pixhawk

from frskytelemetryscript.

from frskytelemetryscript.

Alright so I used a SanDisk 32GB Class 10 MicroSD (DSQUNC-032G-GN6MA) and the issue still occurs.

I did the following:

1. Tested switching between flightmodes before arming (worked fine).
2. Armed with Stabilize
3. Took off
4. After getting 15ft in the air switched to Loiter. At this point the radio did not indicate Loiter was activated and still showed Stabilize.
5. Switched to RTL. Still no change in display.
6. The copter landed and once landed the UI updated with RTL and that the landing was complete.

from frskytelemetryscript.

Additional info: I kept an eye on the FlightMode value in the telmetry settings window for the copter on OpenTX and the value did not update there either.

from frskytelemetryscript.

I set the LOG_BITMASK to 0 and now it's working which fits with your SD write speed theory. I just can't fathom how that SD isn't fast enough.

from frskytelemetryscript.

I know it sounds weird but you're not the first one who reported it.

ArduPilot/ardupilot#6274

from frskytelemetryscript.

Yep I just found it a few minutes ago. Really weird. It might be worth mentioning in the README :).

Thanks for the help!

from frskytelemetryscript.

you're welcome, can I close the issue?

from frskytelemetryscript.

you're right I should add a trobleshooting section in the readme...

from frskytelemetryscript.

Closing.

Thanks for your help and writing this awesome script 👍

from frskytelemetryscript.