FrSKY X9D PLUS Taranis "not enough memory" about frskytelemetryscript HOT 6 CLOSED

Hi,
this happens when you try to compile the script on the radio.
You need to copy the binary version from https://github.com/yaapu/FrskyTelemetryScript/tree/master/TARANIS/SD
to your radio SD card.
Then configure the script as a telemetry one.
Make sure it's the only script running.

from frskytelemetryscript.

is this solved?

from frskytelemetryscript.

from frskytelemetryscript.

I would confirm and reemphasize make sure the Yaapu script is the only one running. My memory error problem abated after removing the farl script on the second telemetry page.

from frskytelemetryscript.

...another thing to watch for is OpenTX vs EdgeTX with the latter (version 2.8.x) leaving much less memory to LUA scripts

from frskytelemetryscript.

@yaapu (Alex), does this mean EdgeTX + ELRS on Taranis X9D (ACCST) cannot run Yaapu?
I don't have any other scripts running, and when I try to enable CRSF protocol (Yes/No), it gives me an error "Not enough memory"

from frskytelemetryscript.