Do you have 3D file of board with screen attached? about t-display-s3 HOT 6 CLOSED

@mmMicky is it possible to get both the screen versions as 3d files. The rectangular non-touch version, and the newer touch version with rounded glass. Thanks!

from t-display-s3.

https://github.com/Xinyuan-LilyGO/T-Display-S3/blob/main/3D_file/glass_screen.stp

I uploaded the screen file. actually using the need to combine them together

from t-display-s3.

https://github.com/Xinyuan-LilyGO/T-Display-S3/blob/main/3D_file/glass_screen.stp

I uploaded the screen file. actually using the need to combine them together

I'm having this problem when trying to import the file into Autodesk Fusion 360. Please check.

from t-display-s3.

I use Rhino 7 to open fine.

from t-display-s3.

Thanks @mmmickey, that's brilliant.
@t-rekttt thanks for the warning, it opens with freecad (file->import) - here's a re-exported copy
FreecadExport-TDisplayS3_glass_screen.zip

from t-display-s3.

TDisplayS3touch_stl_fbx_step.zip
Added version together, including STEP file, STL file, fusion360 fbx project.

It's approximately positioned 1.5mm from top edge and 5.5mm from board to glass surround which matches roughly the unit in my hands (closer to 5mm), and matches the normal t-displays3 if you measure to the top of LCD. It is not centered along the midpoint lenghtways, but instead roughly positioned (LCD overhangs 0.236mm left and 0.246mm right)

from t-display-s3.