Comments (22)
Thanks for your feedback! Schematic is not currently supported, only the board layout. If there is enough demand, I may add it in the future
from easyeda2kicad.
Awesome indeed so I vote 👍 for this one also.
from easyeda2kicad.
Is there a hope that the schematic conversion will be implemented?
from easyeda2kicad.
it will be awesome if both schema and pcb can export.
from easyeda2kicad.
The latest release (1.6.0) also add supports for Junctions and No Connect flags in schematics.
from easyeda2kicad.
@yaybee worked on it in #58, but unfortunately I haven't had the time yet to go over the changes and integrate them
from easyeda2kicad.
@urish Is there a plan for this one also? It would be helpful in case of big schematics as it gets tedious to be re-created by hand in KiCAD. Indeed PCB conversion is more important at this point but I think this one will be also in the future IMHO.
I can help with testing of course but not on the development side 'cause I'm not a good programmer 😄.
Thanks.
from easyeda2kicad.
@mtiutiu not sure yet - I'm checking with some friend who may want to look into it
from easyeda2kicad.
@karinchechik started working on this
from easyeda2kicad.
For the time being, the code only handles the conversions of wires in schematics. The command for converting the schematics is the same as PCB, and the program automatically detects the file type and performs the conversion accordingly:
easyeda2kicad filename.json filename.sch
Components, junctions, texts, etc. are not supported yet. Also multi-page schematics are not supported (only the first page will be converted).
from easyeda2kicad.
Thank you @urish. You made an incredibly useful thing.
Just out of curiosity is what would it take for you to be motivated enough to want to have it convert the easyEDA schematic? If that isn't a valid question in 2021 is there another way to perform this task with possibly another tool that didn't exist in Feb 2020. A lots's happened since then.
from easyeda2kicad.
Grate tool. I am waiting for the schematic conversion to finish. Then it will be a complete tool.
How about making it a plugin tool inside KICAD. New version 6 as they say is very "plugin friendly"
from easyeda2kicad.
I would like to also express my interest for supporting schematic conversion.
from easyeda2kicad.
I would like to also express my interest in supporting schematic conversion.
from easyeda2kicad.
Yes, please. I know this is an old thread but if you could add schematic conversion you would save me weeks, of time..
from easyeda2kicad.
Unfortunately, I do not have the bandwidth to add this feature.
from easyeda2kicad.
here is a python version: https://github.com/uPesy/easyeda2kicad.py
from easyeda2kicad.
@yangjuncode thanks for sharing! Cool to see that your version also supports 3d module conversion.
from easyeda2kicad.
Guys this is getting better and better. I hope to see soon a final version that does it all. Congratulations to everybody.
Our team without KiCAD will never could do this contribute to the community: www.wizcube.eu
Easyeda is a place where useful material can be found and transferred to KiCad to easy community designs.
Thanks again guys...
from easyeda2kicad.
Schematic conversion would be very useful.
from easyeda2kicad.
Really need this. The only reason I'm even using KiCAD is because EasyEDA completely borked the PCB created from my schematic, so I need to restart with the schematic in better software.
from easyeda2kicad.
One more vote for EasyEDA schematic conversion support. Thanks!
from easyeda2kicad.
Related Issues (20)
- 404 - Failed - No File HOT 5
- Error in generated KiCad PCB file HOT 4
- Warning: unsupported layer id: ## HOT 1
- Make a footprint library? HOT 2
- Double quotes in string not escaped properly HOT 1
- Only accept JSON in file input? HOT 1
- Failed conversion HOT 1
- Doesnt give a "good/ correct" out put for kicad and has the bellow errors
- Expecting layer/width in input source
- Unexpected WARNING messages during conversion
- SCH can't to support
- Issue: Wrong footprint generated
- TypeError when attempting to convert board
- Allow the webui to specify LCSC part numbers and generate kicad files
- Slot hole X and Y are reversed
- can't run easyeda2kicad HOT 1
- A suggestion. HOT 1
- easyeda2kicad - unsupported format with project.json Kicad v7.0 HOT 2
- Snapd issues?
- File will not convert... HOT 3
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from easyeda2kicad.