Fail to get the file discriptor? about wasmer HOT 6 CLOSED

It seems wasmer could ont open any file, whether native and other runtimes could.

from wasmer.

@Userzxcvbvnm could you please test your use case with #4730? since I believe this is a duplicate of #4724.

from wasmer.

I tried my test case with the wasmer of commit 4730, but failed again with the same output I mentioned.
The steps are:
(1) git clone https://github.com/wasmerio/wasmer.git
(2)git reset --hard 6aee08d6b0e1b9a9cc38e6bef0e93c0aa3f52fe1 (set to commit 4730)
(3)make build-wasmer
(4)wasmer run --dir=. read.wasm
Print:

Get file descriptor of file ./hello.txt failed!

from wasmer.

Thanks for testing. I'll investigate.

from wasmer.

I can confirm your provided example, now works using the latest commit of #4730.

from wasmer.

Thanks for your reply and commit!
I reproduced the test by setting Wasmer to commit d202535(the newest 4730 commit). However, I still get the result Get file descriptor of file ./hello.txt failed!.
Is there anything wrong with my command or with your code?

from wasmer.