Question: Is it possibe to limit AC charge input for AC200MAX? about bluetti_mqtt HOT 6 CLOSED

No, this will not work, because there is no function for this in the APP.

Thanks for clarifying that.

from bluetti_mqtt.

No, this will not work, because there is no function for this in the APP.

from bluetti_mqtt.

@itn3rd77, you can create a simple service and set the Tasmota MQTT relay on your AC200 charger. That's what I've done. It works like a charm.

from bluetti_mqtt.

@itn3rd77, you can create a simple service and set the Tasmota MQTT relay on your AC200 charger. That's what I've done. It works like a charm.

Hi @gerab, can you explain better what did you do? Are you able to limit the charging power from the AC200 charger?

from bluetti_mqtt.

@itn3rd77, you can create a simple service and set the Tasmota MQTT relay on your AC200 charger. That's what I've done. It works like a charm.

Hi @gerab, can you explain better what did you do? Are you able to limit the charging power from the AC200 charger?

Hi. Yes, I wrote a .net service, which monitors AC200 battery levels and toggles the AC charger when the level is below-configured minimum. It charges it until the battery level reaches the expected percent. If you're familiar with .net and c# I can share the source code with you.

from bluetti_mqtt.

@gerab , this is not what @itn3rd77 asked. I do what you did with Home Assistant: I enable AC charger (with smart plug) only when battery is below 15%. But in this way the charger charge always @500w. What is usefull to do is to limit the charge power to less, for example 200W, because I have another FTV on grid and I can have only 200W surplus to put in the storage

from bluetti_mqtt.