[Bug]: Issue with the Y-position on the nameplate about classiccastbars HOT 6 CLOSED

Hi. There's an editbox right below the sliders that you can click and manually type in the numbers you want, then hit enter to save. Decimals will be rounded to nearest integer.

Edit: If you can't see the editboxes you might have an addon like ElvUI installed that modifies the sliders. Try temporarily disabling it.

from classiccastbars.

Hello, I can see them, but if you type it manually and then confirm that, then it won't work and when you open back the settings its -9 or -19 again. You can type the value you want, but it wont save it, it will just go back to the ones that you can set with the slider.

from classiccastbars.

I also tested it without any other addon activated and it is still the same. Manually entering a number doesn't work, and you can only slide on the sliderbar in steps of 10.

from classiccastbars.

Hmm weird, it saves properly for me on both TBC & classic era client. Can you confirm if it's still not saving the value in v1.4.4 update?

Sadly it's not possible to change the slider behaviour as it's from a third party library and not made by me. When using large numbers it'll always use steps in 5-10 ish, even if you hard configure it to use '1' as a step value.

If you still can't get it to work, you can manually change the XY positions using these chat commands:

/run ClassicCastbars.db.nameplate.position[2] = 10
/run ClassicCastbars.db.nameplate.position[3] = 12

(Change 10 and 12 to whatever number you want. You will have to restart the castbar to see the changes)

from classiccastbars.

@wardz I just updated from 1.4.3 to 1.4.4. Sliders now go in steps of 5 instead of 10, and the manual adjustment works :) Great!

from classiccastbars.

A mistake I also may have made is not pressing enter after inserting a value and directly press ''Okay''

from classiccastbars.