Nothing showed up for vulnerabilites, what did i do wrong? about nmap-vulners HOT 4 OPEN

Starting Nmap 7.80 ( https://nmap.org ) at 2019-09-07 04:21 EDT
PORTS: Using top 1000 ports found open (TCP:1000, UDP:0, SCTP:0)
--------------- Timing report ---------------
hostgroups: min 1, max 100000
rtt-timeouts: init 1000, min 100, max 10000
max-scan-delay: TCP 1000, UDP 1000, SCTP 1000
parallelism: min 0, max 0
max-retries: 10, host-timeout: 0
min-rate: 0, max-rate: 0

NSE: Using Lua 5.3.
NSE: Arguments from CLI:
NSE: Loaded 46 scripts for scanning.
NSE: Script Pre-scanning.
NSE: Starting runlevel 1 (of 2) scan.
Initiating NSE at 04:21
Completed NSE at 04:21, 0.00s elapsed
NSE: Starting runlevel 2 (of 2) scan.
Initiating NSE at 04:21
Completed NSE at 04:21, 0.00s elapsed
mass_rdns: Using DNS server 192.168.1.1
Initiating Parallel DNS resolution of 1 host. at 04:21
mass_rdns: 0.01s 0/1 [#: 1, OK: 0, NX: 0, DR: 0, SF: 0, TR: 1]
Completed Parallel DNS resolution of 1 host. at 04:21, 0.01s elapsed
DNS resolution of 1 IPs took 0.01s. Mode: Async [#: 1, OK: 0, NX: 1, DR: 0, SF: 0, TR: 1, CN: 0]
Initiating Connect Scan at 04:21
Scanning 192.168.1.11 [1000 ports]
Connect Scan Timing: About 15.50% done; ETC: 04:25 (0:02:49 remaining)
Connect Scan Timing: About 30.50% done; ETC: 04:25 (0:02:19 remaining)
Connect Scan Timing: About 45.50% done; ETC: 04:25 (0:01:49 remaining)
Connect Scan Timing: About 60.50% done; ETC: 04:25 (0:01:19 remaining)
Connect Scan Timing: About 75.50% done; ETC: 04:25 (0:00:49 remaining)
Stats: 0:03:20 elapsed; 0 hosts completed (1 up), 1 undergoing Connect Scan
Connect Scan Timing: About 99.00% done; ETC: 04:25 (0:00:02 remaining)
Current sending rates: 9.98 packets / s.
Completed Connect Scan at 04:25, 201.40s elapsed (1000 total ports)
Overall sending rates: 9.93 packets / s.
Initiating Service scan at 04:25
NSE: Script scanning 192.168.1.11.
NSE: Starting runlevel 1 (of 2) scan.
Initiating NSE at 04:25
Completed NSE at 04:25, 0.00s elapsed
NSE: Starting runlevel 2 (of 2) scan.
Initiating NSE at 04:25
Completed NSE at 04:25, 0.00s elapsed
Nmap scan report for 192.168.1.11
Host is up, received user-set.
All 1000 scanned ports on 192.168.1.11 are filtered because of 1000 no-responses

NSE: Script Post-scanning.
NSE: Starting runlevel 1 (of 2) scan.
Initiating NSE at 04:25
Completed NSE at 04:25, 0.00s elapsed
NSE: Starting runlevel 2 (of 2) scan.
Initiating NSE at 04:25
Completed NSE at 04:25, 0.00s elapsed
Read from /usr/bin/../share/nmap: nmap-payloads nmap-service-probes nmap-services.
Service detection performed. Please report any incorrect results at https://nmap.org/submit/ .
Nmap done: 1 IP address (1 host up) scanned in 202.18 seconds

from nmap-vulners.

same here in 2021.1 kali. its broken

from nmap-vulners.

Hello.

Do you have a specific CVE script is unable to show? Try scanning the nmap host:

nmap -sV --script vulners -p80 scanme.nmap.org

from nmap-vulners.

Hi everyone. I found out that 804a692 broke the script.
Just remove line 135 (Accept-Encoding) and the script will work.

from nmap-vulners.