TRRS support about dactyl-keyboard HOT 3 CLOSED

I would like to restore the features currently lost between the forks, including TRRS. However, I’m not sure that a circular aperture would suffice. Geometrically, a normal through-hole-mountable TRRS jack, or even a breakout board, is more complicated than the RJ9s I’ve been using.

Do you have schematics for a specific design, or a drawing of the kind of mount you have in mind?

from dactyl-keyboard.

I don't have a particular TRRS socket in mind. Mostly, I find the available TRRS cables nicer to work with than the available RJ-9. For example, it's possible to get sleeved TRRS, but not sleeved RJ-9.

from dactyl-keyboard.

For lack of a general solution, consider the following: When you get a specific socket, model that and use the model as negative space inside a cuboid. Divide the result into two halves, like a casting mold, and print them. Then you would have an adapter.

Ideally, the two halves would fit so neatly around your socket that you could take this separately printed cuboid adapter and your TRRS socket and slide them snugly into the DMOTE case where I put my RJ9. If that works, I would be happy to accept the model of your socket, and of the adapter, as options for the DMOTE.

A quick-and-dirty solution, without the CAD work, would be to embed your sockets in something like Kneadatite (or wood, or whatever), which takes both paint and punishment.

from dactyl-keyboard.