frequency error caused from fractional pll about nanovna HOT 4 CLOSED

Hi, edy555, there is related question. I'm not sure why there is limit for the minimum frequency span? With the latest firmware the minimum span is 10 kHz, when I'm trying to set 1-9 kHz it shows saw wave. 10 kHz span is insufficient for some tasks, such as crystal measurements, so it will be great to reduce this limit to allow at least 1 kHz span.

si5351 allows to produce frequency with very high resolution, much better than 1 Hz. it is used in another VNA projects. If there is needs help, I can share tested code for si5351 which works great.

Is it possible to change this frequency span limitation to at least 1 kHz span?
Thanks

from nanovna.

Thanks for your report!
The issue about narrow span is addressed in #52 but fix in 0.2.0 release is incomplete, as you said.
I just fixed it again in 0aeadaa
please try https://github.com/ttrftech/NanoVNA/releases/tag/0.2.2

from nanovna.

yes, narrow span now works ok, thanks :)

from nanovna.

fixed at 6a88f8e

from nanovna.