Fill Plates about dactyl-keyboard HOT 3 OPEN

Yes, the bottom plates have the outline and the screw holes. As I recall, I needed to do some manual editing of the dxf files to remove unneeded parts. I couldn't figure out how to fully automate it.

from dactyl-keyboard.

Yes, i also couldn’t find out how to fill them … hull() as is the convex hull isn’t quite right (produces a too large plate …), and the other similar operation, minowski() is also not what we want.

One thing i took a while to understand is that openscad can spout out a 2d DXF of the plate, which you can then extrude in the CAD of your choice. All that’s left is to add a generation procedure for the left side of the plate.

Since i think it’d help others, i’ll probably PR generation of both sides of the plates, with a small
README.md hint reminding other users of the DXF+CAD way … if that’s ok?

Thanks and Best,
-Dario

from dactyl-keyboard.

There is an orientation that works to slice the plate, hull the slices, and union those hulls, but I was still tuning it for performance and then lost my changes. It's definitely workable though

from dactyl-keyboard.