Giter Club home page Giter Club logo

Comments (4)

GoogleCodeExporter avatar GoogleCodeExporter commented on August 16, 2024
Thanks for the report.

I already suspected that "reloaded" would not work on the dns321, and that is 
non-fixable.

According to several dns321 owners, RC2 runs OK on their boxes, apart a couple 
of  issues that was fixed on a snapshot RC3 release.
The current RC3 release has those changes built-in, so it should work fine on 
the dns321.
RC3 also allows flashing the vendor's firmware back.

As I don't own a dns321 myself, I haven't tested that, so your only way of 
being sure is to use the forum and ask for confirmation.
I would like to have RC3 usage report on that box.

Original comment by [email protected] on 8 May 2013 at 3:35

  • Changed state: WontFix

from alt-f.

GoogleCodeExporter avatar GoogleCodeExporter commented on August 16, 2024
Based on the above I flashed RC3 into the DNS-321 this AM.  It seems
to work for what little I did.  There are the cosmetic issues where it
refers to it as a DNS-323 instead of a DNS-321.

I had planned to flash back to DLink 1.03 FW but the flash page gives
4 options which aren't clear in my mind currently.  So haven't done
anything but shut it off for now.

Yes, saw the exchanges between Matt and yourself.

Don't know what 'usage' you are talking about.  Do you simply want
remote access to one so you can see the various screen information ?

I have 2 goals for this box:

1.  Use 3 TB drives
2.  Install enough Debian to run Hercules-390 emulator as described here:


http://hercules390.996247.n3.nabble.com/Hercules-installed-on-D-LINK-DNS-323-td1
1345.html

he mentions other NAS boxes also below:

"Nope. My NAS models (and performances) are:

DLINK DNS 323 (ARM) - 0.92 MIPS
DLINK DNS 343 (ARM) - 1.22 MIPS
DLINK DNS 325 (ARM) - 3.03 MIPS
NETGEAR READYNAS  (SPARC) - 0.72 MIPS
NETGEAR READYNAS P(x86) - 13.5 MIPS
FUJUTSU Q700 (ARM) - 2.74 MIPS
QNAP TS-239 PRO (x86) - 11.2 MIPS
SINOLOGY DS-209 II PRO (PowerPC) - 12.2 MIPS
IOMEGA IX-200 (ARM) - 2.45 MIPS
CONCEPTRONICS CH3 NAS (ARM) - 0.92 MIPS.

I've also installed Hercules on two little boards used for building routers:

WRAP (x86) - 0.71 MIPS
ALIX (x86) - 3.07 MIPS

All the MIPS tests were made with a home made Pascal program
(environment VM/SP), that performs a series of operations on strings,
integer and real numbers.

I like to use NAS as Hercules machines because they can be seen as
'little mainframes' of 80's years (expecially for the poor
performances..;-). "

Original comment by [email protected] on 8 May 2013 at 12:20

from alt-f.

GoogleCodeExporter avatar GoogleCodeExporter commented on August 16, 2024
> There are the cosmetic issues where it refers to it as a DNS-323 instead of a 
DNS-321

If you could be so kind as to tell me where...

> I had planned to flash back to DLink 1.03 FW but the flash page gives 4 
options which aren't clear in my mind currently. 

The Firmware Update main page has online help, hit the (?) icon near the page 
title. If anything is not clear please let me know.

> Don't know what 'usage' you are talking about.

Any odd behaviour during normal utilization, such as the cosmetic issues you 
refer above, as well as leds, buttons, fan speed and control, box 
temperature... anything related to what is/can be specific of the dns-321 
hardware. The flashing procedure, also.

> 2.  Install enough Debian to run Hercules-390 emulator as described here:

You can use Setup->Debian to install Debian on disk; you can then either 
(k)execute Debian (leaving Alt-F), or chroot it. Type 'debian' at the command 
line to see its usage.

But it's really better to use the forum for this kind of conversation, so 
others will benefice.

Original comment by [email protected] on 8 May 2013 at 3:17

from alt-f.

GoogleCodeExporter avatar GoogleCodeExporter commented on August 16, 2024
Different issue altogether and may not pertain to D-321 or other D-Link boxes.

"enable write buffer coalescing"

I also bought a SS4000-E recently and it has a Intel Xscale 90219 (
ARM 5 ? ) CPU.

A thread about poor performance found a setting impacts throughput.

From :

http://marc.info/?l=linux-arm-kernel&m=120448177713206&w=2

"> when investigating some memory write performance issues on a Thecus N2100

Shows example of difference when switch is changed performance on some
things went from 12 to 47 range increased to 121 to 126 range.

Patch is in this post:

http://marc.info/?l=linux-arm-kernel&m=120508539011727&w=2

Have joined group I think.  Was going to post concerning D-321 issue
but some thing happened and I didn't get around to it.  Will get back
to it tomorrow.

Phil

Original comment by [email protected] on 16 May 2013 at 11:52

from alt-f.

Related Issues (20)

Recommend Projects

  • React photo React

    A declarative, efficient, and flexible JavaScript library for building user interfaces.

  • Vue.js photo Vue.js

    🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.

  • Typescript photo Typescript

    TypeScript is a superset of JavaScript that compiles to clean JavaScript output.

  • TensorFlow photo TensorFlow

    An Open Source Machine Learning Framework for Everyone

  • Django photo Django

    The Web framework for perfectionists with deadlines.

  • D3 photo D3

    Bring data to life with SVG, Canvas and HTML. 📊📈🎉

Recommend Topics

  • javascript

    JavaScript (JS) is a lightweight interpreted programming language with first-class functions.

  • web

    Some thing interesting about web. New door for the world.

  • server

    A server is a program made to process requests and deliver data to clients.

  • Machine learning

    Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.

  • Game

    Some thing interesting about game, make everyone happy.

Recommend Org

  • Facebook photo Facebook

    We are working to build community through open source technology. NB: members must have two-factor auth.

  • Microsoft photo Microsoft

    Open source projects and samples from Microsoft.

  • Google photo Google

    Google ❤️ Open Source for everyone.

  • D3 photo D3

    Data-Driven Documents codes.