thecolonelyoung Goto Github PK

3d_prebo

3D printer expansion board. Add more fan controllers, TMC2130 wiring support, induction probe voltage convertor, LED lighting (supports WS1812).

aether

alohal

Abstraction Layer Over Hardware Abstraction Layer. API in C++ with objective-oriented design over STM HAL. Support STM32 Fx and Lx family.

arachne

Mainly 3D printed manipulator with 6 axis of freedom based on design of steward platform

arducam_stm32_hal_demo

Example of image capture and transfer with Arducam SPI camera modules connected to STM32 Nucleo L432KC

development_notes

halup

hephaestus

Solder paste dispensor powered by stepper motor.

jupiter_linux

Kernel source tree for Raspberry Pi with WIP support for IMX678.

kconfig_test

kicad-tools-template

kratos_pack

Battery case with electronics for charging and protection of battery cells. Composes of 2s li-ion 3,7V battery cells. Includes undervoltage, overvoltage and overcurrent protection. As well as reverse voltage protection. Is charged from USB type-C connector. Support statistics over USB and have battery voltage indication via LEDs.

linux-a83t

Linux kernel source tree

magni

Electric linear actuator powered by stepper motor. Based on 3D printed body with built-in bearing.

ncl30160_demo

Demonstration board for light control IC NCL30160.

pico-dev

Development setup for RP2040 contaning FreeRTOS, TinyUSB and UnitTesting(Catch2 + FakeIt + gcov) mostly in docker container

ringone

3D air mouse based on STM32 - Can be used for controlling CADs and every other manipulation in 3D space. Is based around STM32L452, IMU LSM6DSL (gyroscope and accelerometer) and Bluetooth low power module RN4871. Also contains battery management system for charging internal battery and also powering itself from this li-po battery (around 40 mah). Battery can be recharged via USB type C which can be also used for streaming data from accelerometer.

sewing_machine_regulator

Electrical speed regulator for sewing machine. Uses Hall probe instead of unreliable carbon discs.

st-link-6or4-pin-adapter

Adapter from 10 pin connector on ST-Link clone to 6 or 4 pin IDC connector

stm-dev

Development setup for STM32 contaning FreeRTOS, TinyUSB and UnitTesting(Catch2 + FakeIt + gcov) mostly in docker container

thecolonelyoung.github.io

Mdwiki server