Comments (6)
jpnielsen
commented on August 18, 2024
Perhaps of use, i installed Ubuntu Studio 21.04
uname -a
Linux ubuntustudio 5.11.0-25-lowlatency #27-Ubuntu SMP PREEMPT Sat Jul 10 00:06:29 UTC 2021 x86_64 x86_64 x86_64 GNU/Linux
Ubuntustudio 21.04, Booted to KDE, Switched to tty with Ctrl-Alt-F3, turned on ProFire Lightbridge - when it stops booting, a panic (took picture and OCR+edited):
[ 268.951611] mce: [Hardware Error]: CPU 13: Machine Check Exception: 7 Bank 0: bc002800000c0135
[ 268.951614] mce: [Hardware Error]: RIP 10:<ffffffffc05b61f0> {getcycletime+0x10/0x120 [firewire_ohci]}
[ 268.351616] mce: [Hardware Error]: TSC ffc231bc28 ADOR fc7000c0 MISC d01a000000000000 IPID b000000000
[ 268.351618] mce: [Hardware Error]: PROCESSOR 2:870f10 TIME 1626843309 SOCKET 0 APIC b microcode 8701021
[ 268.551619] Kernel panic - not syncing: Fatal local machine check
[ 268.952114] Kernel Offset: 0x9400000 from Oxffffffff81000000 (relocatiom range: 0xffffffff80000000-0xffffffffbfffffff)
grep firewire /var/log/syslog
Jul 21 06:10:45 ubuntustudio kernel: [ 0.658424] firewire_ohci 0000:05:00.0: enabling device (0080 -> 0083)
Jul 21 06:10:45 ubuntustudio kernel: [ 0.714658] firewire_ohci 0000:05:00.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
Jul 21 06:10:45 ubuntustudio kernel: [ 13.913262] firewire_core 0000:05:00.0: created device fw0: GUID 0011223333666677, S400
from linux-firewire-dkms.
jpnielsen
commented on August 18, 2024
Let me add the version number found in the Windows software (version 6.0.4) for the M-Audio ProFire LightBridge:
bootloader: 2006/03/14 17:51:18
firmware: 2006/09/14 14:54:30
hardware: model:8 version: 0
GUID: 000D-6C08-00A6-7063
from linux-firewire-dkms.
jpnielsen
commented on August 18, 2024
News - New kernel - no panic.
But, pulseaudiocontrol takes a long time to come up - and the Firewire<>Adat box is not seen.
Behringer Ultragain Pro-8, adat sync blinks irregularly
Presonus Digimax FS set to adat sync locks, blinks, locks ...
The adat devices are set to sync to adat
M-Audio Profire Lightbridge LEDs:
44.1k is lit
Sync source Int is blinking irregularly.
uname -a
Linux manjaro 5.14.0-rc2-next-20210722custom #1 SMP PREEMPT Thu Jul 22 18:08:41 CEST 2021 x86_64 GNU/Linux
dmesg
[ 137.815364] firewire_ohci 0000:05:00.0: isochronous cycle inconsistent
[ 138.329420] firewire_core 0000:05:00.0: created device fw1: GUID 000d6c0800a6706e, S400
[ 138.329611] firewire_core 0000:05:00.0: phy config: new root=ffc1, gap_count=5
[ 197.749370] snd_bebob fw1.0: FCP command timed out
[ 197.749377] snd_bebob fw1.0: fail to get section type for isoc out plug 0: -5
[ 198.133359] snd_bebob fw1.0: FCP command timed out
[ 198.435260] snd_bebob fw1.0: transaction failed: conflict error
[ 198.481281] snd_bebob fw1.0: transaction failed: conflict error
[ 198.526292] snd_bebob fw1.0: transaction failed: conflict error
[ 198.571278] snd_bebob fw1.0: transaction failed: conflict error
[ 198.571286] snd_bebob fw1.0: fail to get an input for MSU in plug 7: -5
[ 198.616471] snd_bebob fw1.0: transaction failed: conflict error
[ 198.616478] snd_bebob fw1.0: fail to get an input for MSU in plug 7: -5
[ 198.662898] snd_bebob fw1.0: transaction failed: conflict error
[ 198.662906] snd_bebob fw1.0: fail to get an input for MSU in plug 7: -5
[ 198.708284] snd_bebob fw1.0: transaction failed: conflict error
[ 198.708291] snd_bebob fw1.0: fail to get an input for MSU in plug 7: -5
[ 198.760286] snd_bebob fw1.0: transaction failed: conflict error
[ 198.760293] snd_bebob fw1.0: fail to get an input for MSU in plug 7: -5
[ 198.805274] snd_bebob fw1.0: transaction failed: conflict error
[ 198.805282] snd_bebob fw1.0: fail to get an input for MSU in plug 7: -5
[ 198.849471] snd_bebob fw1.0: transaction failed: conflict error
[ 198.849478] snd_bebob fw1.0: fail to get an input for MSU in plug 7: -5
[ 198.893531] snd_bebob fw1.0: transaction failed: conflict error
[ 198.893539] snd_bebob fw1.0: fail to get an input for MSU in plug 7: -5
[ 198.937463] snd_bebob fw1.0: transaction failed: conflict error
[ 198.937470] snd_bebob fw1.0: fail to get an input for MSU in plug 7: -5
[ 198.981517] snd_bebob fw1.0: transaction failed: conflict error
[ 198.981525] snd_bebob fw1.0: fail to get an input for MSU in plug 7: -5
[ 393.604694] snd_bebob fw1.0: Detect discontinuity of cycle: 58224 62238
[ 418.105681] snd_bebob fw1.0: Detect discontinuity of cycle: 62226 2240
[ 458.114359] snd_bebob fw1.0: Detect discontinuity of cycle: 62238 2253
[ 536.859305] snd_bebob fw1.0: Detect discontinuity of CIP: C0 C8
[ 593.064260] snd_bebob fw1.0: Detect discontinuity of CIP: B8 C0
[ 618.125590] snd_bebob fw1.0: Detect discontinuity of cycle: 62256 2270
[ 672.872016] snd_bebob fw1.0: Detect discontinuity of CIP: B8 C0
[ 713.031817] snd_bebob fw1.0: Detect discontinuity of CIP: B0 B8
[ 738.118130] snd_bebob fw1.0: Detect discontinuity of cycle: 62285 2299
[ 864.896532] snd_bebob fw1.0: Detect discontinuity of CIP: B0 B8
[ 953.089148] snd_bebob fw1.0: Detect discontinuity of CIP: B0 B8
[ 992.920674] snd_bebob fw1.0: Detect discontinuity of CIP: C0 C8
[ 1273.103460] snd_bebob fw1.0: Detect discontinuity of CIP: A8 B0
[ 1313.015606] snd_bebob fw1.0: Detect discontinuity of CIP: B0 B8
[ 1338.166550] snd_bebob fw1.0: Detect discontinuity of cycle: 62461 2476
from linux-firewire-dkms.
takaswie
commented on August 18, 2024
Hi,
News - New kernel - no panic.
That sounds good. As long as I know, many users of Ryzen Zen 2 SoC encounter the similar issue. I guess it comes from the other part of functions irrelevant to IEEE 1394 bus and M-Audio ProFire Lightbridge.
Anyway the kernel panic issue is fixed in your side. Let you close the issue and file another one for the discontinuous issue.
from linux-firewire-dkms.
jpnielsen
commented on August 18, 2024
pulseaudiocontrol takes a long time to come up - and the Firewire<>Adat box is not seen.
Behringer Ultragain Pro-8, adat sync blinks irregularly
Presonus Digimax FS set to adat sync locks, blinks, locks ...
The adat devices are set to sync to adat
M-Audio Profire Lightbridge LEDs:
44.1k is lit
Sync source Int is blinking irregularly.
uname -a
Linux manjaro 5.14.0-rc2-next-20210722custom #1 SMP PREEMPT Thu Jul 22 18:08:41 CEST 2021 x86_64 GNU/Linux
dmesg
[ 137.815364] firewire_ohci 0000:05:00.0: isochronous cycle inconsistent
[ 138.329420] firewire_core 0000:05:00.0: created device fw1: GUID 000d6c0800a6706e, S400
[ 138.329611] firewire_core 0000:05:00.0: phy config: new root=ffc1, gap_count=5
[ 197.749370] snd_bebob fw1.0: FCP command timed out
[ 197.749377] snd_bebob fw1.0: fail to get section type for isoc out plug 0: -5
[ 198.133359] snd_bebob fw1.0: FCP command timed out
[ 198.435260] snd_bebob fw1.0: transaction failed: conflict error
[ 198.481281] snd_bebob fw1.0: transaction failed: conflict error
[ 198.526292] snd_bebob fw1.0: transaction failed: conflict error
[ 198.571278] snd_bebob fw1.0: transaction failed: conflict error
[ 198.571286] snd_bebob fw1.0: fail to get an input for MSU in plug 7: -5
[ 198.616471] snd_bebob fw1.0: transaction failed: conflict error
[ 198.616478] snd_bebob fw1.0: fail to get an input for MSU in plug 7: -5
[ 198.662898] snd_bebob fw1.0: transaction failed: conflict error
[ 198.662906] snd_bebob fw1.0: fail to get an input for MSU in plug 7: -5
[ 198.708284] snd_bebob fw1.0: transaction failed: conflict error
[ 198.708291] snd_bebob fw1.0: fail to get an input for MSU in plug 7: -5
[ 198.760286] snd_bebob fw1.0: transaction failed: conflict error
[ 198.760293] snd_bebob fw1.0: fail to get an input for MSU in plug 7: -5
[ 198.805274] snd_bebob fw1.0: transaction failed: conflict error
[ 198.805282] snd_bebob fw1.0: fail to get an input for MSU in plug 7: -5
[ 198.849471] snd_bebob fw1.0: transaction failed: conflict error
[ 198.849478] snd_bebob fw1.0: fail to get an input for MSU in plug 7: -5
[ 198.893531] snd_bebob fw1.0: transaction failed: conflict error
[ 198.893539] snd_bebob fw1.0: fail to get an input for MSU in plug 7: -5
[ 198.937463] snd_bebob fw1.0: transaction failed: conflict error
[ 198.937470] snd_bebob fw1.0: fail to get an input for MSU in plug 7: -5
[ 198.981517] snd_bebob fw1.0: transaction failed: conflict error
[ 198.981525] snd_bebob fw1.0: fail to get an input for MSU in plug 7: -5
[ 393.604694] snd_bebob fw1.0: Detect discontinuity of cycle: 58224 62238
[ 418.105681] snd_bebob fw1.0: Detect discontinuity of cycle: 62226 2240
[ 458.114359] snd_bebob fw1.0: Detect discontinuity of cycle: 62238 2253
[ 536.859305] snd_bebob fw1.0: Detect discontinuity of CIP: C0 C8
[ 593.064260] snd_bebob fw1.0: Detect discontinuity of CIP: B8 C0
[ 618.125590] snd_bebob fw1.0: Detect discontinuity of cycle: 62256 2270
[ 672.872016] snd_bebob fw1.0: Detect discontinuity of CIP: B8 C0
[ 713.031817] snd_bebob fw1.0: Detect discontinuity of CIP: B0 B8
[ 738.118130] snd_bebob fw1.0: Detect discontinuity of cycle: 62285 2299
[ 864.896532] snd_bebob fw1.0: Detect discontinuity of CIP: B0 B8
[ 953.089148] snd_bebob fw1.0: Detect discontinuity of CIP: B0 B8
[ 992.920674] snd_bebob fw1.0: Detect discontinuity of CIP: C0 C8
[ 1273.103460] snd_bebob fw1.0: Detect discontinuity of CIP: A8 B0
[ 1313.015606] snd_bebob fw1.0: Detect discontinuity of CIP: B0 B8
[ 1338.166550] snd_bebob fw1.0: Detect discontinuity of cycle: 62461 2476
from linux-firewire-dkms.
jpnielsen
commented on August 18, 2024
I did buy a 5m FireWire cable - the FW wikipedia page says 4.5m max - perhaps that is part of the explanation for the errrors ?
from linux-firewire-dkms.
Related Issues (20)
- M-Audio ProFire Lightbridge: Discontinous errors HOT 5
- Mackie Onyx 1640i: Kernel module snd-oxfw plays audio in slow motion. HOT 45
- Card detected but not available HOT 3
- Mackie Onyx 1640i: JACK instance hangs randomly after long playback. HOT 28
- Firewire MOTU 8-PRE: sound output is VERY distorted HOT 2
- Behringer X32: Crackling playback at 48 kHz HOT 18
- FireFace800 buffer freezes HOT 9
- UBSAN: invalid-load in fcp.c load value of 16 is not valid for type '_Bool' HOT 4
- saffire pro 40 - tries to connect but fails HOT 8
- Fireface 802 : does not work with a buffer size of 128 / periods 2
- [snd-dice] latency 13 times higher compared to FFADO (Saffire 14 PRO) with jack2 HOT 1
- mic Input no longer avasilable after upgrading to ubuntu 22.10 HOT 5
- Fireface 800 stuck in initialization after sleep HOT 2
- fireface 802: too much latency with pipewire HOT 7
- snd-bebob does not recognize Behringer FCA1616 HOT 6
- Question... HOT 5
- saf pro40 - cannot get alsa / lib spa / pipewire to see / recognise 96khz mode (it still sees 48000 max) HOT 4
- Fireface 800 lockup with pipewire HOT 1
- Fireface 802 : higher roundtrip latency than expected
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from linux-firewire-dkms.