Entities not populating - what are correct settings? about homeassistant-goecharger-mqtt HOT 4 CLOSED

In the past the serial number was always part of the topic. This is the reason why this integration concatenates the base topic and and serial number gathered from the config flow. Please change the topic to /goe/123456 using the Android app. In this case the component will be able to subscribe to the required topics.

from homeassistant-goecharger-mqtt.

Thanks! That did the trick!

1. In the Android app, MQTT prefix = /goe/123456/
2. In the integration setup, serial number = 123456 and base topic = /goe

from homeassistant-goecharger-mqtt.

Could you provide some complete topic examples? Is there a serial number part of the topic? This is important.

from homeassistant-goecharger-mqtt.

No, I am using bare /goe/ as prefix in the e-go APP.
In HA MQTT integration I receive following:

Message 172 received on /goe/rssi at 8:55 PM:
-78
QoS: 0 - Retain: false
Message 171 received on /goe/eto at 8:55 PM:
3932605
QoS: 0 - Retain: false
Message 170 received on /goe/tpa at 8:55 PM:
6462.143066
QoS: 0 - Retain: false

When configuring the go-eCharger (MQTT) integration:

Serial number*
123456

Base topic*
/goe/

But all entities remain "unavailable".

I tried to manually create some MQTT sensors in HA configuration.yaml:

mqtt:
  sensor:
    - name: "goe_charger_eto_energy_total"
      state_topic: "/goe/eto"
    - name: "goe_charger_lmo_logic_mode"
      state_topic: "/goe/lmo"

And they work just fine!

HA version 2023.10.0

from homeassistant-goecharger-mqtt.