Name: SuperHouse Automation
Type: Organization
Bio: DIY home automation, assistive technology, Arduino, Raspberry Pi, and ESP8266/ESP32 projects.
Twitter: superhousetv
Location: Melbourne, Australia
Blog: https://superhouse.tv/
SuperHouse Automation's Projects
2 x load cell I2C interface
Particulate Matter Sensor firmware for a Plantower PMS5003 connected to a Wemos D1 Mini
Air quality sensor hardware
Simple menu-driven Arduino controller for AXA window motors with LIN bus interface
AXA electric window controller with LINbus and WiFi using an ESP8266 (ESP-12 version)
AXA electric window controller with LINbus and WiFi using an ESP8266 (ESP-01 version)
Control AXA window motors using LIN bus connections and MQTT
git-svn mirror of axTLS SVN repo, plus a branch with embedded-friendly tweaks
Minimal Arduino sketch for Sonoff / Slampher with OTA support
Control a Sonoff / Slampher using MQTT with OTA support
Business card on a PCB with a light sensor and an ATtiny85 MCU
I/R & RF transmitter / receiver with WiFi
ESP8266 module with an X-Bee footprint, using an ESP-12 module
Building Brain home automation controller
Home automation controller based on CHIP
Home automation controller based on NanoPi NEO
PCB outline to fit into "OODTY" plastic project box
Eagle PCB template to fit the UB3 plastic project box
Eagle PCB template to fit the UB5 plastic project box
Eagle project template to fit a VG-S28 plastic project box
Wheelchair control system breakout with CAN bus support
Wheelchair control system breakout
I2C interface adapter for electric wheelchairs, to allow the joystick input to be controlled electronically
Prototyping DIP (add-on board) for the C.H.I.P.
ESP8266 module with a Spark Core / Particle Photon footprint
Bluetooth serial shield for the WeMos D1 Mini with ESP8266
3x4 matrix RGB LED shield for the WeMos D1 Mini
Power supply shield for the WeMos D1 Mini with ESP8266
Prototyping shield for the WeMos D1 Mini with ESP8266
Servo controller shield for the WeMos D1 Mini with ESP8266