Implement offset line about guidancesteering HOT 21 CLOSED

Implement, please test.

from guidancesteering.

The offset can only be set in 1 direction.
Would it be possible to add a value change using the mouse wheel (eg after hovering the window with the value)?

from guidancesteering.

Explain? You can set the incremental on negative so it flips the side.

from guidancesteering.

wat he means (i think)

is when your plowing with a plow that can rotate you want the ofset to change side as well.

so lets says you set a positive ofset of 1.0 but when your on the end of the field you turn the plow and tractor then you need a negative ofset of 1.0

video exemple of the fs 17 gps https://youtu.be/xuY8eutbcAg?t=429
(there the ofset did automaticly change when you turned around the tractor)

from guidancesteering.

Ah yea, it tried to fix that last night because it's also inverting when you drive backwards that way. Need to have something depending on drive direction I guess. Will fix.

from guidancesteering.

How can I set a negative offset since the button increases the value always on the positive?

from guidancesteering.

In the second column you have a selection box where you can select the increment.. from 0.01, 0.1, 0.5 etc to -0.01, -0.1, -0.5 etc.

If you select the increment there and hit the offset button it will either go negative or positive depending on the increment you've set earlier.

from guidancesteering.

ok, a bit strange system (I do not know what relationship has an additional change in working width with offset)

from guidancesteering.

What are you trying to say between the ()?

The incremental has no relationship with width or offset it just defines how much you can incremental a given value.. how hard can that be? If you want fine steps you have a small incremental number else you select a bigger one. What that number you can update the offset or width.

from guidancesteering.

Now I've got how it works, only the field "Width increment" is very confusing (as if it only served to change the width, in addition it was before the appearance of the offset). This field is best if it had a changed name, e.g. "Change in value by" and moved to column 1, so that it would not be associated only with the working width.

from guidancesteering.

Yes good suggestion, will change the name of the increment.. it's misleading indeed. 👍

from guidancesteering.

just noticed its not working on dedicated multiplayer server.

you can set but it keeps going on the centerd line and not on the ofset line
(did test on singel player and there it works as intended)

from guidancesteering.

Should work now. @dehjvg

from guidancesteering.

@stijnwop its fixed for 50% positive ofset is working but negative ofset is not following any gps line far as i can see

from guidancesteering.

@dehjvg Alright thats suppose to be fixed too.. ;)

from guidancesteering.

still the same isseu did not change

from guidancesteering.

Explain your issue with images etc.. cause this isn't working.

from guidancesteering.

btw. only me don't show a tip from the offset?

from guidancesteering.

https://www.youtube.com/watch?v=JSQltFi4tTY&feature=youtu.be hope this helps

but when i set ofset 1 it follows the ofset line when -2 it goes to the rightr but not following the gps
(its on dedicated server)

from guidancesteering.

@dehjvg thanks for the video!
Fixed the bug.

from guidancesteering.

@stijnwop i can comfirm its working good now :D

from guidancesteering.