64bit dll-s about kaliopamobileviewer HOT 4 CLOSED

Hi, just put all dll files from your x64 ($\Web\www\mapviewernet\bin) to bin folder in this aplication and it should work. You should also have to check if your settings in IIS are right (Enable32 bit applications = false in Application Pool that this application is running on).

from kaliopamobileviewer.

Hi,

Thanky you for the reply, it is much appreciated. Our problem is, that we
cannot disable 32bit applications, since it is necessary for other dlls to
run in the application we wanted integrate Kaliopa into.

Anyway, this was an important piece of information for us.

Best regards and good job on the viewer, thanks for the support,
Gábor Grósz
HungaroCAD Ltd.
[email protected]

2015-04-09 14:41 GMT+02:00 Srečko Lipovšek [email protected]:

Hi, just put all dll files from your x64 ($\Web\www\mapviewernet\bin) to
bin folder in this aplication and it should work. You should also have to
check if your settings in IIS are right (Enable32 bit applications = false
in Application Pool that thi spplication is running on).

—
Reply to this email directly or view it on GitHub
#1 (comment)
.

from kaliopamobileviewer.

Hi Gabor,

You can simpy create new Application Pool in IIS and than Assign that application pool to this Application.

1.   In IIS go to Application Pool -> Add Application Pool (make shure that you pick right .NET frameork and disable 32bit application)
   

2.   Assign that Application pool to your application
   

a. If appplication is already created: right click on application -> Manage Application -> Advanced Settings -> Pick your Newly Created Application Pool

b. If application is NOT yet created: when creating application -> Create Application -> Pick your Newly Created Application Pool

Each New application Pool created in IIS is reflected in running services. New w3wp service is running for each Application Pool.

Hope it helps.
Have a nice day.

from kaliopamobileviewer.

Hi Srečko,

Thank you for your help (again and again), we managed to integrate it
yesterday :)

We have another application, which made it harder to implement it,
otherwise it worked like a charm out of the box, following the readme.

Best regards, Gabor

2015-04-15 8:44 GMT+02:00 Srečko Lipovšek [email protected]:

Hi Gabor,

You can simpy create new Application Pool in IIS and than Assign that
application pool to this Application.

1. In IIS go to Application Pool -> Add Application Pool (make shure that
   you pick right .NET frameork and disable 32bit application)
2. Assign that Application pool to your application

a. If appplication is already created: right click on application ->
Manage Application -> Advanced Settings -> Pick your Newly Created
Application Pool

b. If application is NOT yet created: when creating application -> Create
Application -> Pick your Newly Created Application Pool

Each New application Pool created in IIS is reflected in running services.
New w3wp service is running for each Application Pool.

Hope it helps.
Have a nice day.

LP,
Srečko Lipovšek
univ.dipl.inž.gradb. | Razvoj in projekti
T: +386 (0)3 490 24 81 G: +386 (0)41 987 901 E: [email protected]
mailto:[email protected]

[cid:[email protected]]

Kaliopa d.o.o.
Letališka 32j, SI-1000 Ljubljana, T: +386 (0)1 520 82 80, F: +386 (0)1
520 82 90
www.kaliopa.sihttp://www.kaliopa.si/ | www.iobcina.si<
http://www.iobcina.si/> | www.ikomunala.sihttp://www.ikomunala.si/ |
www.slovenija.sihttp://www.slovenija.si/

zastopstvo | prodaja | izobraževanje
[Opis: Opis: Opis: C:\Users\Snežka.Bracun\Desktop\footer.jpg]

From: ittisvagyok [mailto:[email protected]]
Sent: Wednesday, April 15, 2015 8:01 AM
To: sreckolipovsek/KaliopaMobileViewer
Cc: Srečko Lipovšek
Subject: Re: [KaliopaMobileViewer] 64bit dll-s (#1)

Hi,

Thanky you for the reply, it is much appreciated. Our problem is, that we
cannot disable 32bit applications, since it is necessary for other dlls to
run in the application we wanted integrate Kaliopa into.

Anyway, this was an important piece of information for us.

Best regards and good job on the viewer, thanks for the support,
Gábor Grósz
HungaroCAD Ltd.
[email protected]:[email protected]

2015-04-09 14:41 GMT+02:00 Srečko Lipovšek <[email protected]
mailto:[email protected]>:

Hi, just put all dll files from your x64 ($\Web\www\mapviewernet\bin) to
bin folder in this aplication and it should work. You should also have
to
check if your settings in IIS are right (Enable32 bit applications =
false
in Application Pool that thi spplication is running on).

—
Reply to this email directly or view it on GitHub
<
https://github.com/sreckolipovsek/KaliopaMobileViewer/issues/1#issuecomment-91218530>

.

—
Reply to this email directly or view it on GitHub<
https://github.com/sreckolipovsek/KaliopaMobileViewer/issues/1#issuecomment-93207076>.

—
Reply to this email directly or view it on GitHub
#1 (comment)
.

from kaliopamobileviewer.