How to change I2C address about sparkfun_displacement_sensor_arduino_library HOT 2 OPEN

I was able to successfully change addresses and then revert to the original address. One thing that tripped me up, may not be your issue, is that the program asks for input in decimal . . . the first few times I put 12 in thinking it was 0x12. Then I figured out what the program wanted. You can also look at the repository from BendLabs that the SparkFun library is based on here: https://github.com/bendlabs. I have been jumping between the two libraries: the SparkFun superior for ease of use, the BendLabs for understanding what is going on under the hood, so to speak. The i2c address change example works in the BendLabs repository as well.

from sparkfun_displacement_sensor_arduino_library.

I encountered the same problem with the two-axis sensor. Have you already solved it? No matter what I try, I can't change the address from 0x12 to any other address. From the code, I guess the address 0x12 may be the bootloader address of the two-axis sensor.

from sparkfun_displacement_sensor_arduino_library.