Internal Connection Problem Yellow warning when trying to run any script on the WiFi Duck from DSTike about wifiduck HOT 6 CLOSED

Thanks for opening your first issue here! 🎉
👉 Be sure to:
1. 📖 Have a look at the Wiki and README for information
2. 🔍 Search for similar issues (open and closed)
3. ✍️ Provide enough information to understand, recreate and help out with your problem
4. ℹ️ Let us know if you find a solution
5. 📕 Close the issue when your problem has been solved

from wifiduck.

Hi all.

I have exactly the same problem. My self-soldered wifi duck(y) worked well with the old wifi ducky software. So I think, my the hardware is not the problem (Beetle USB ATMEGA32U4 Mini + 3,3V regulator + ESP 12 E, without separate LED/Neopixel).

Now I flashed the new wifi duck files like described in the actual description.

I can connect to the wifi duck, can edit and save some sample scripts but when trying to run, the yellow error message "Internal Connection Problem" appears. When reconnecting, it says "connected" again.

Any idea?

Thanks for your help.

from wifiduck.

Sorry, my fault. Old Wifi Ducky used RX/TX and new Wifi Duck uses SDA/SCL. Resoldered the connectiona and voila, it works like a charm.

from wifiduck.

i have the same problem and i dont know what to do i also have a self soldered WIFI-ducky but i checked the connections over 100 times and they are connected correctly. I have also reuploaded the software 2 times to the boards, i have a pro-micro with the needed mega32u4 board and a nodemcu esp8266 boards.

Any idea on how i should fix this??
Thank you

from wifiduck.

i have same issue i am using arduino pro micro and esp8266 12E board when I try to edit script it shows internal connection error in yellow.
Please help..
Thank you

from wifiduck.

This issue has been automatically marked as stale because it has not had recent activity. It will be closed if no further activity occurs. Thank you for your contributions.

from wifiduck.