When I connect to the wifi duck it says that there is an internal connection problem about wifiduck HOT 28 CLOSED

Sadly... i am facing issues with the nodeMCU too :'(.. It worked fine for some hours n it stopped working.

from wifiduck.

Thanks for opening your first issue here! 🎉
👉 Be sure to:
1. 📖 Have a look at the Wiki and README for information
2. 🔍 Search for similar issues (open and closed)
3. ✍️ Provide enough information to understand, recreate and help out with your problem
4. ℹ️ Let us know if you find a solution
5. 📕 Close the issue when your problem has been solved

from wifiduck.

I've tried connecting them with jumper wires and I still get the same issue.

from wifiduck.

Tentei conectá-los com fios de jumper e continuo com o mesmo problema.

Hello, I have the same problem, found a solution?

from wifiduck.

Hi. It would be really helpful if you could share pictures of your setup, so we can see the hardware connections.

from wifiduck.

Oi. Seria muito útil se você pudesse compartilhar fotos de sua configuração, para que possamos ver as conexões de hardware.
Hello, thank you for your answer, I was able to solve using the wemos D1 mini, with esp8266 and node mcu, the connection is not stable, I think for energy reasons. Now I'm having doubts in the deauther, because I couldn't get the led and the oled to work, I think I'm not sure what to comment on in the aconfig.h code, the conection is working well. Thanks

from wifiduck.

Hi, i also got the same issue as @M-a-c-a-r-o-o-n .. Please find the connection diagram attached. Also as @Nikakz said, my WS2812B is not working even when i had selected LED as ON. The diagram for the LED connection is not attached . Also in case the image is not visible

Arduino Wemos D1 Mini
2 D2
3 D1
RAW 5v
GND GND

Also, i had to install EasyAsyncTCP and EasyAsyncWebServer from github as the same were not available on arduino library, which were of the latest version. The library version might be the issue ?

from wifiduck.

Also, I was able to get it working once but once I get the internal connection error, the device remains in the same state. And after reinstalling wifi duck it works again.

from wifiduck.

The connections seem correct. But it could be an issue with the jumper cables or the breadboard. Maybe one of them has a loose contact or something like that.

from wifiduck.

Hallo,
I have the same issue, the wiring is good and I can get a serial message on the ATMega...

Interpreting: Replying with status
RECEIVED [SOT] ' [EOT]

but that gets into a loop and then disconnects. I am using cheap boards so that is probably causing it. Going to try with a Wemos D1.

Tschüss

from wifiduck.

@spacehuhn I had thought the same. But it happens everytime. I had permanently soldered all the connection and check it with a multimeter. In some cases I got it working if I disconnected the two wires except the power connections and reconnected them back. But not always possible. Will try it again when I get some new wemos board. Btw has someone used this with other boards like nodemcu ? If possible lemme know

from wifiduck.

So an update to the above... the code is working fine for NODEMCU 12E version. SO you guys can switch. Btw i'll be using the board for the whole day tommorow and give you all an update

from wifiduck.

Hello, when I had this problem, but it was with a esp12 and then with an MCU node, it was not with the wemos D1 mini, it was a matter of energy that the esp consumes and is generating this page as you reported and I gave up on the esp 12 and node mcu and already with wemos I had stability and there were no problems with the connection.

from wifiduck.

Descreva o erro
Após conectar ao pato, há uma barra amarela na parte superior informando que há um problema de conexão interna. Não há saída para o monitor serial e não consigo digitar nada usando o pato

Meio Ambiente:

• SO: Windows 10
• Versão: 1.0.4 (0)
• Hardware: Arduino Pro Micro, Weimos D1 Mini, PCB do Spacehuhn

Tentativas
tentei conectar ao monitor serial sem sucesso e tenho verificado todas as conexões de solda que são bons

Alguém tem ideia de qual pode ser o problema?
Hello, when I had this problem, but it was with a esp12 and then with an MCU node, it was not with the wemos D1 mini, it was a matter of energy that the esp consumes and is generating this page as you reported and I gave up on the esp 12 and node mcu and already with wemos I had stability and there were no problems with the connection.

from wifiduck.

Infelizmente ... estou enfrentando problemas com o nodeMCU também: '(.. Funcionou bem por algumas horas n parou de funcionar.
Hello, as I spoke with esp12 and node mcu for me it didn't work, I only got stability with the wemos D1 mini and the neopixel led works, but it only stays with the green light on, it doesn't light up blue and I couldn't solve it, the mine is stable on the connection.

from wifiduck.

@spacehuhn Same issue like @hunny1389 on the NODE MCU for Az-Delivery
(Pictures)

from wifiduck.

@KatzeMau You missing the Atmega32u4: README.me#hardware

from wifiduck.

@spacehuhn can you please provide a link for an esp8266 with a atmega32u4 chip or would this be okay ?

https://www.aliexpress.com/item/4000256143274.html
Is there something more cheap then 27€?

from wifiduck.

Right now there isn't a cheaper option that is as compatible as the DSTIKE WIFI Duck

from wifiduck.

Right now there isn't a cheaper option that is as compatible as the DSTIKE WIFI Duck

Yeah, bought one :)

from wifiduck.

This issue has been automatically marked as stale because it has not had recent activity. It will be closed if no further activity occurs. Thank you for your contributions.

from wifiduck.

Have there been any updates on this? I am having the same "Internal Connection Problem" issue. I have tried with a Pro Micro and D1 Mini as well as a genuine Leonardo and ESP8266 NodeMCU.

from wifiduck.

Have a look here: #94 (comment)

from wifiduck.

hola tengo el mismo problema tengo este aparato q compre no se si me pueden dar una mano

from wifiduck.

hello, I have the same problem

from wifiduck.

Hey 👋 I am a littlebit confused. So if I have an esp8266 then I don't need the Atmega32u4?

from wifiduck.

from wifiduck.

Não

Sandra Viana
Enviado do meu iPhone

Em seg., 1 de jan. de 2024 às 13:05, luxkatana @.***>
escreveu:

Hey 👋 I am a littlebit confused. So if I have an esp8266 then I don't
need the Atmega32u4?

—
Reply to this email directly, view it on GitHub
#50 (comment),
or unsubscribe
https://github.com/notifications/unsubscribe-auth/AFFRWZ6ECTRVT6W5BOERFWLYMLNCZAVCNFSM4PYVHTO2U5DIOJSWCZC7NNSXTN2JONZXKZKDN5WW2ZLOOQ5TCOBXGMZTQMRYGUYA
.
You are receiving this because you were mentioned.Message ID:
@.***>

So I do need the Atmega32u4?

from wifiduck.