Possible Issues with Compiling for Bambino 210e about smoothie2-old HOT 15 CLOSED

• Comment out the following line in src/makefile so that it will build for the memory model on your LPC4330 instead of the LPC4337 in the Smoothie2 board.

LPC4330_M4_LSCRIPT := LPC4337.ld

• When using LPCScrypt to program your device, you will want to change the second LPCScrypt command to be the following instead so that it uses SPIFI instead of internal FLASH:

/Applications/lpcscrypt_1.6.0_652/bin/lpcscrypt program +c LPC4330_M4/Smoothie2.bin SPIFI

Hopefully that will get you further along. There will no doubt be some other differences that you have to deal with.

from smoothie2-old.

Thanks @adamgreen :)

from smoothie2-old.

@kasandell Did you have a chance to try the changes I mentioned above? Did you get any further?

from smoothie2-old.

Hey @adamgreen so sorry. I haven't had wifi for the past few days so I just saw this. When I posted this, I was hoping to get the board working before I left for Europe but I didn't get a reply until I was in the airport. Sadly I won't be able to test this for another 2 weeks. I do apologize for this.

from smoothie2-old.

@kasandell Ok. Keep us posted after you get back and have time to experiment with it again.

from smoothie2-old.

Hey @adamgreen. I just got back from Europe, and testing smoothie out with the new suggestions, nothing seems to behave any different than it did before. Any ideas on what else to try?

from smoothie2-old.

Nothing else comes to mind. I have a Bambino 210E here that I can try on sometime later this week.

from smoothie2-old.

Alright. I'll try out some other operating systems and see if my mac is just causing problems.

from smoothie2-old.

If I get it to work later this week, it will be on OS X since that is my primary OS and is what I have used for all Smoothie2 work so far :) I believe that Arthur uses Ubuntu.

from smoothie2-old.

I have started getting the latest sources to run on my Bambino 210E board. I have it starting up now but I am hitting some issues in the code which I need to ping @arthurwolf about during his awake hours.

from smoothie2-old.

All right sounds good. I've been trying to see if any of the fixes mentioned in #13 work for the Bambino 210E. No luck so far.

from smoothie2-old.

@kasandell I should be ready to push up Bambino210E support on Tuesday afternoon. I just have a few more things to cleanup and discuss with Arthur before I do.

from smoothie2-old.

Awesome. Thank you!

from smoothie2-old.

@kasandell I have updated the makefile to allow the Smoothie firmware to startup and run on my Bambino210E board. By default the makefile still builds a binary suitable for running on Smoothie2 boards but you can modify one line in the makefile to switch it to the Bambino210E. I documented the selection that you can select in the makefile here. That should allow you to see the output on the virtual serial port you get when you plug a USB cable into the USB1 port on the board.

from smoothie2-old.

This should be fixed by PR #16. Please re-activate if not the case.

from smoothie2-old.