[Feature request] Custom Designation string for each norm about freecad_fastenerswb HOT 4 OPEN

for ASME, ASME B18.12.1 - 2006 A Guide for the Development
of
ASME B18 Standards
for
Mechanical Fasteners (2.6 Designation on page 8) or ASME B18.2.1-2010 (2.11 on page 3) seams to define a standard method of designation, but I think a pure global designation style may not the best solution.

from freecad_fastenerswb.

That would be nice for the BOM having "Hexagon head bolt DIN 961 - M8 x 1 x 50 - 8.8" but in the Tree View maybe something shorter like "DIN 961 - M8x1x50".
Respect to materials: a lot of work has been done on the Materials WB so maybe when it's done could be implemented here, personally I haven't tested it already.

from freecad_fastenerswb.

Respect to materials: a lot of work has been done on the Materials WB so maybe when it's done could be implemented here, personally I haven't tested it already.

I do not think so, because the standards typically define in what property class and material the "thing" is available.
ISO 8676 states that with Steel there is 5.6; 8.8 and 10.9 for d <= 39mm and with Stainless steel there is A2-70; A4-70 for d <=24mm, A2-50; A4-50 for 24mm < d <= 39mm. (also some more, but this is just for illustration)
The same is with the other DIN and ISO standards.
So the possibility to add a data table would be more useful for the property class, but a Simple string property would be a good start, maybe the ability to add a standard depending default value.

from freecad_fastenerswb.

Look here: https://www.bigboltnut.com/product/iso-4014.html at table Specifications and reference International Standards

from freecad_fastenerswb.