sghnsk Goto Github PK

adafruit-trinket-usb

Arduino libraries allowing Trinket to act as USB devices

at32_fan_control

at32_hdmi_swicher_control

attiny85_fan_control

attiny85_rgb_ws2812

Example ws2812 on attiny85 with Adafruit_NeoPixel

boothid

BootHID based on Grendel

desoldering_oled_1306

dht11_display_meter

показометр температуры/влажности с DHT11+DS18B20

foo2zjs

A linux printer driver for QPDL protocol - copy of http://foo2zjs.rkkda.com/

grbl_1.1

Прошивка grbl для сборки через platformio

kicad-esp8266

Schematic symbols and PCB footprints for ESP8266 modules

klipper

Klipper is a 3d-printer firmware

marlin_1.1.19

Стабильная версия Marlin 1.1.19 настройки под Anycubic Kossel Linear Plus

marlin_2.0

Marlin is an optimized firmware for RepRap 3D printers based on the Arduino platform. | Many commercial 3D printers come with Marlin installed. Check with your vendor if you need source code for your specific machine.

marlin_fb4s

Marlin 2.0 for Flying Bear 4S/5

mcad

OpenSCAD Parametric CAD Library (LGPL 2.1)

mks-robin-nano-v1.x

MKS Robin Nano is a powerful 32-bit 3D printer control board with STM32F103VET6. Support Marlin2.0. Support MKS Robin TFT24/28/32/35/43 touch Screens. The motherboard integrates 5 AXIS interface, hot bed, 2 heating heads, 3 NTC100K, 1 MAX31855.The motherboard integrates After shutdown. Support MKS Robin WIFI for cloud printing and supports firmware update by SD card…

mks-sgen_l-v2

MKS SGEN_L V2.0 is powerful 32-bit 3D printer control board. The CPU is LPC1769 120MHZ, SGEN_L V2 hardware Integrated 4KB EEPROM, 5AXIS and dual Z interface, has 2 way FANs and Dc12/24V out interface, support TMC UART and SPI mode...

octoprint-easyservo

Here is a simple plugin to control 2 servos using the OctoPrint Control tab. It can be used for example to move your camera wirelessly

octoprint-enclosure

OctoPrint Enclosure Plugin

octoprint-telegram

Plugin for octoprint to send status messages and receive commands via Telegram messenger.

octoscreen

LCD touch interface for our Octoprint

qc3_trigger

qc3 attiny trigger (simple)

qmk_firmware

Open-source keyboard firmware for Atmel AVR and Arm USB families

sht30_display_meter

Показометр температуры/влажности на sht30

sht3x

Arduino library for Sensorion SHT3x humidity and temperature sensors (SHT30, SHT31, SHT35).

smart-domofon

Smart intercom with MQTT based on NodeMCUv3

teapot_detail

test_trinketkeyboard

пример с TrinketKeyboard с индикацией включенного scroll lock

testit-allure-adaptor