Synchronous control of coolers about g-helper HOT 6 CLOSED

@PeppyTrash hello, your fans are always controlled by BIOS.

If you don't like how BIOS controls fans - you can try Experimental build with a manual fan control.

Check readme on that page for more details. To achieve what you want you can set :
"fan_shift" : 100, - to make both fans follow maximum temp of CPU/GPU

Thanks

from g-helper.

Maybe I explained it wrong. I haven't seen yet how to make the GPU fan ignore the GPU graph and take the CPU graph speed so that both fans run at the same rpm. Thank you in advance

from g-helper.

@PeppyTrash please read my answer fully. You can use experimental build for that purpose. Just make both graphs same, and set fan_shift to 100 (to follow CPU temp, as most likely it will be the maximum of both)

from g-helper.

Yes, I read it, installed the build and made changes to the config, but there is still no desired result. At the moment, the CPU temperature is 55 degrees, the fan speed is 36% and I would like that, REGARDLESS of the temperature, the GPU fan is also running at 36%

I do not exclude that I am being stupid, please forgive me :D

from g-helper.

@PeppyTrash it doesn't look you have set

"fan_shift" : 100, 

Can you upload your config here ?

from g-helper.

This is the example of how it works when fan_shift is set to 100 (and both fans follow maximum of both temps, i.e CPU temp)

from g-helper.