G-Helper not applying fan curves correctly. about g-helper HOT 3 CLOSED

@fscottcopeland hello,

G-Helper is applying fan curves

2023-12-29 13:38:38: FanCPU = 28-32-3C-46-50-55-5A-5F-14-14-1E-28-32-3C-46-50 : OK
2023-12-29 13:38:38: FanGPU = 28-32-37-3C-41-46-4B-50-14-14-1E-28-32-3C-46-50 : OK

Rest is up to your BIOS. If you believe BIOS is not following curves exactly you can contact Asus support about the matter.
https://github.com/seerge/g-helper/wiki/FAQ

Please check FAQ before submitting

Also better look at RPM scale instead of %, as asus has very strange interpretation of %

Good luck.

from g-helper.

Balls. You're right. Checking the RPM rather than percentage is more at parity with the graph. Thank you. Annoying that % scale doesn't work fully :(

from g-helper.

For asus 0% = 0RPM, 1% = 1800RPM, 100% = 6000RPM (or whatever your max is)

Y-Axis in % is added by request from one of the users, to make it convenient to migrate custom curves from AC to the app. As in AC scale is done in exactly that way

from g-helper.