ap_array is empty about explore-and-match HOT 7 CLOSED

Hello, as for this problem, do you have some solution for me to reproduce this work ?

from explore-and-match.

Since there is no error in my case, It seems that modification of the code is causing the issue.
Please take a look at the code you have modified!

And if you need further help, as the error message is too general, could you perhaps elaborate?

from explore-and-match.

Since there is no error in my case, It seems that modification of the code is causing the issue. Please take a look at the code you have modified!

And if you need further help, as the error message is too general, could you perhaps elaborate?

Thank you so much. I'll check my code carefully. So sorry to bother you.

from explore-and-match.

No problem :)

from explore-and-match.

I had the same problem. I found that this is due to the fact that there are not moments in "Long" length.

https://github.com/sangminwoo/Explore-and-Match/blob/c07381affbad334e39793c4ca1563b45510e890e/lib/evaluate/eval.py#L135-L156

from explore-and-match.

I had the same problem. I found that this is due to the fact that there are not moments in "Long" length.

https://github.com/sangminwoo/Explore-and-Match/blob/c07381affbad334e39793c4ca1563b45510e890e/lib/evaluate/eval.py#L135-L156

Have you solved this problem?

from explore-and-match.

If you do not need to specify the length of time segments, maybe you can consider removing all the "range-related" codes and just run!

from explore-and-match.