Just spinning Wheel about espsomfy-rts HOT 5 OPEN

In a browser type http://ip address/backup where ip address is the ip address of the esp32. This will backup your device.

from espsomfy-rts.

Remove power and let it reboot. It looks like you somehow have a newer version of the application than the firmware. Do you somehow have v2.4.0 of the firmware installed with the v2.4.2 application or is that the HA integration version.

from espsomfy-rts.

have rebootet it (with disconnect the power a few times ) same problem - its HA integration version.

How could i update it without the webGUI ?

from espsomfy-rts.

If you have internet connectivity and have backed up your configuration using the command above, type the following command into a browser.

First run
http://<ipaddress>/backup

Then run. This command will take a few minutes as it downloads the firmware and the browser may not return right away or even timeout. Give it at least 5 minutes to do its thing.
http://<ipaddress>/downloadFirmware?ver=v2.4.2

from espsomfy-rts.

Hmm, seems like I have the same issue after updating to 2.4.2. I completed the github update process and after everything seems to be ok the browser did not reload. It just has a spinning wheel and an empty browser.

I tried the commands above but with no result...

Edit: I was able to reflash the firmware but would like to restore a backup. Any idea where I can find the backup in HA or something? I can't seem to find any backup on my PC.

Edit2: Found a backup in the Home Assistant File Editor.

from espsomfy-rts.