Add limit on the tilt movements when position is not at 100% about espsomfy-rts HOT 3 OPEN

I need to get this clear in my head so I am going to make some assertions below and you can let me know if they are correct.

When the vertical blind is 100% closed and 100% tilted closed. Then if you short press the up button once it will first rotate the slats open to 70% then begin moving to the full open position. When it reaches the end it will then be at 0% with 70% tilt.

Then if you short press the down button. It will first rotate the slats to 30% then begin moving to the full closed position. When it reaches the end it is then at 30% or does it rotate to 0% when it reaches the end.

from espsomfy-rts.

Sorry for the late reply buy for some reason the mail went to spam.

It is not fully correct on the tilt as it goes to the end on the tilt fist and then to 70%, And it is a bit confusing in my head also so i think the easyest way to get on the same page is if you have a look on this video of one of the blinds here (Can only upload 10mb to github so had to use google) Here you can se the full motion from opened to closed and from closed to open.

from espsomfy-rts.

I took a look at your video and while it seemed to answer some of the questions I need to get it clear in my head before making modifications that might support this. It seems like there is a separate motor for the slat position. Is that the case or are we dealing with something mechanical.

It looks like when closing it simply runs to the 70% position then starts moving. However, when opening it seems like it first moves to 0% then back to 30% then starts moving open. I assume that while it is doing the tilt movement if you press the my button after the up it will stop in that position. Does it then go back to 100% on the tilt if you press the down button again?

from espsomfy-rts.