IO-Remote LOW/HIGH about espsomfy-rts HOT 5 CLOSED

Hmm you know that during boot you will get a period when all the pins are low or float. If you are powering the relay with the same juice it will be triggered during boot unless you pull them high with an external pullup.

The trigger length is controlled by the number of repeats to about 170ms (normal frame length) per repeat.

I can certainly change the triggerGPIOs method to invert high and low to accommodate but it does come with warts in that many of the pins on esp32 are pulled low at boot or they float. Which relay are you using for reference or are you triggering buttons on a dissected remote?

from espsomfy-rts.

It's a dissected remote. Comparable to this one https://projecthub.arduino.cc/beejayf/somfyduino-io-2def54
the mentioned trigger length of 170ms should not be an issue

from espsomfy-rts.

If you update from the Main repository I added the ability to identify the trigger as a low level trigger. Check the box and high will be low and low will be high for the configured motor.

from espsomfy-rts.

that works.
great - many thanks

from espsomfy-rts.

I am going to close this one for now. This functionality is included in the next release but you can continue to run from the main repository.

from espsomfy-rts.