I found an "ERROR" in your library with the software I'm using. about artnetwifi HOT 3 OPEN

I found an "ERROR" in your library with the software I'm using

What is the error?

could I change the channels that are sent?

I don't know, I do not know your software.

change the start channel and end channel of the universe?

I don't know, I do not know your software.

My library is just a "tool" to make Art-Net projects. The examples are only to help and support you during your development. In some cases they are good enough for small and/or simple projects, but not for all.

• What is your transmitter software? QLC+? Jinx?
• What is the "error"?

from artnetwifi.

• Qual é o "erro"?
  The two software that I tested and they worked, receive 0, 510 channels, but Lumikit SHOW, receives 1.512, and would have to configure to take advantage of the rest of the division of 512 / 3, the 0.666, to connect channels 511 and 512

from artnetwifi.

Is this the expected format for your setup?

Yes, in the current examples the channels 511 and 512 are discarded.
This behavior is also described in the README.md file.
If you need a different behavior, you have to write your own onDmxFrame() function to overcome this "limitation".

from artnetwifi.