Comments (6)
In the older scripts, I only added support for the TEW-632BRP, the TEW652BRP I
have not analyzed. Did you try the older scripts to (the ones without -ng)?
Original comment by [email protected]
on 18 Oct 2011 at 11:42
from firmware-mod-kit.
Yes, I've try with both, the -ng and the old one.
I've also try with the TEW-632BRP firmware and I get the same error.
(http://www.dd-wrt.com/dd-wrtv2/downloads/others/eko/BrainSlayer-V24-preSP2/2011
/06-14-11-r17201/trendnet-tew632brp/tew632brp-firmware.bin)
Original comment by [email protected]
on 18 Oct 2011 at 11:50
from firmware-mod-kit.
I only tested with the stock images, not DD-WRT images. Those may have a
different squashfs-lzma signature, or something else, that makes them
incompatible with the assumptions the original script made.
Original comment by [email protected]
on 18 Oct 2011 at 12:06
from firmware-mod-kit.
Just tested both of these firmware images and both were extracted successfully
with extract-ng (see output below). I suspect that the images you have are
corrupt; the first time I ran extract-ng against the TEW-652 firmware image it
failed because of a corrupt image. I find that this happens fairly regularly to
me when dragging-and-dropping into a VMWare VM, so be careful if you are using
VMWare, and always validate your checksums.
The MD5 checksums that I have for these images are:
8ca97d5c85948739e512349eee7eec17 tew632brp-firmware.bin
fa15e20138e249dde38fe8ac906384db tew652brp-firmware.bin
--------------------------------------------------------------------------------
----------------------------------------------
# ./extract-ng.sh tew632brp-firmware.bin
Firmware Mod Kit (build-ng) 0.71 beta, (c)2011 Craig Heffner, Jeremy Collake
http://www.bitsum.com
Scanning firmware...
DECIMAL HEX DESCRIPTION
--------------------------------------------------------------------------------
-----------------------
0 0x0 TRX firmware header, little endian, header size: 28
bytes, image size: 3596316 bytes, CRC32: 0x6ABF4BA flags/version: 0x10001
28 0x1C uImage header, header size: 64 bytes, header CRC:
0xA28A6E0A, created: Tue Jun 14 05:10:58 2011, image size: 852757 bytes, Data
Address: 0x80002000, Entry Point: 0x80006150, data CRC: 0x96594AD1, OS: Linux,
CPU: MIPS, image type: OS Kernel Image, compression type: lzma, image name:
MIPS Linux Kernel Image
856092 0xD101C Squashfs filesystem, big endian, DD-WRT signature,
version 3.0, size: 2738075 bytes, 654 inodes, blocksize: 131072 bytes, created:
Tue Jun 14 05:12:11 2011
Extracting 856092 bytes of trx header image at offset 0
Extracting squashfs file system at offset 856092
Extracting squashfs files...
Firmware extraction successful!
Firmware parts can be found in 'fmk/*'
# ./extract-ng.sh tew652brp-firmware.bin
Firmware Mod Kit (build-ng) 0.71 beta, (c)2011 Craig Heffner, Jeremy Collake
http://www.bitsum.com
Scanning firmware...
DECIMAL HEX DESCRIPTION
--------------------------------------------------------------------------------
-----------------------
0 0x0 TRX firmware header, little endian, header size: 28
bytes, image size: 3596316 bytes, CRC32: 0x9D641CF3 flags/version: 0x10001
28 0x1C uImage header, header size: 64 bytes, header CRC:
0xA28A6E0A, created: Tue Jun 14 05:10:58 2011, image size: 852757 bytes, Data
Address: 0x80002000, Entry Point: 0x80006150, data CRC: 0x96594AD1, OS: Linux,
CPU: MIPS, image type: OS Kernel Image, compression type: lzma, image name:
MIPS Linux Kernel Image
856092 0xD101C Squashfs filesystem, big endian, DD-WRT signature,
version 3.0, size: 2738071 bytes, 654 inodes, blocksize: 131072 bytes, created:
Tue Jun 14 05:13:26 2011
Extracting 856092 bytes of trx header image at offset 0
Extracting squashfs file system at offset 856092
Extracting squashfs files...
Firmware extraction successful!
Firmware parts can be found in 'fmk/*'
Original comment by [email protected]
on 18 Oct 2011 at 2:57
from firmware-mod-kit.
No response from original poster? Firmware is extracted properly for me.
Closing as invalid.
Original comment by [email protected]
on 21 Oct 2011 at 12:14
- Changed state: Invalid
from firmware-mod-kit.
A thank you woulda been nice, eh? ;).
Original comment by [email protected]
on 21 Oct 2011 at 1:03
from firmware-mod-kit.
Related Issues (20)
- mkcramfs-lzma
- Checksums don't match after build
- Fails to compile on Arch x64
- can we extract this firmware file
- extract openwrt ERR No supported file system found!
- Autoconf not listed in prerequisites guide
- Tenda N300 firmware binary - no supported filesystem found.
- Python 2 dependencies HOT 1
- unable to build jffs2 filesystem ... HOT 3
- Add support for UBI filesystems? (Linksys WRT32X)
- Unable to build Zlib HOT 1
- extract-firmware.sh DVRF_v03.bin Tools build failed! Check pre-requisites. Quitting... HOT 2
- Release a new version?
- Extraction error also compliance HOT 3
- Unsupported file system 'mpfs'! Quitting...
- "No supported filesystem found" with Trendnet THA-101 firmware HOT 1
- squashfs-4.0-realtek
- add support for hg630v2
- Installation HOT 1
- Firmware version incorrect after modification
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from firmware-mod-kit.