Comments (11)
This looks like it's using some tweaked broadcom version of lzma. If I can find
source code, I'll add it in; found a few sources, but nothing that seems to
work properly with this firmware.
Original comment by [email protected]
on 9 Sep 2011 at 6:57
- Changed state: Accepted
from firmware-mod-kit.
Well it seems definitely this tweaked lzma compression exists not only int this
HG553 model.
http://huaweihg612hacking.wordpress.com/2011/08/31/the-hg612-squashfs-file-syste
m/
Original comment by [email protected]
on 10 Sep 2011 at 2:21
from firmware-mod-kit.
Yes, I saw that site, but unfortunately the utilities linked to there didn't
work on the image you posted here.
Original comment by [email protected]
on 10 Sep 2011 at 4:27
from firmware-mod-kit.
Hi,
Paul, the guy who runs the blog below managed to obtain the source code for the
HG553 toolchain. That includes x86 binaries for mksquashfs and unsquashfs.
http://www.sbrk.co.uk/hw553/huawei/gpl.html
Paul has promised to publish what Huawei has sent him...
Cheers
Original comment by [email protected]
on 18 Sep 2011 at 9:42
from firmware-mod-kit.
The sources mentioned in the blog are available here:
http://forum.huawei.com/jive4/thread.jspa?threadID=324322&messageID=408081
Unfortunately there is only a compiled version of the mksquashfs tool, so
without the sources is not gonna be easy to spot if they are using a tweaked
lzma compression.
Original comment by [email protected]
on 23 Sep 2011 at 2:20
from firmware-mod-kit.
Pulled down the source provided on Paul's blog, unfortunately only a binary
version of mksquashfs was included and no unsquashfs utility was present.
Leaving this issue open in case we get more info later (may also be related to
issue #27).
Original comment by [email protected]
on 9 Oct 2011 at 2:57
from firmware-mod-kit.
Hi,
Accidentally I have stumbled upon this unsquashfs executable that is capable of
decompressing the vodafone's firmware.
http://es.sourceforge.jp/projects/sfnet_hg55x/downloads/tools/unsquashfs/
Hope it helps.
Original comment by [email protected]
on 3 May 2012 at 11:08
from firmware-mod-kit.
Thanks! Took a look at the binary, appears legitimate and does successfully
extract the squashfs image. Added to the FMK.
Original comment by [email protected]
on 4 May 2012 at 2:25
- Changed state: Fixed
from firmware-mod-kit.
We'll have to add some safeties if we have a binary, if you didn't already.
Specifically for platforms on which it isn't built for. The changes are likely
minimal, perhaps it can be recreated if anyone finds the time or impetus.
Original comment by [email protected]
on 4 May 2012 at 1:47
from firmware-mod-kit.
It's 32bit x86 Linux, so should run on most Linux systems. Any mac/bsd users
will be out of luck for this one though.
The changes may be related to the wnr1000 squashfs code I also checked in; both
the unsquashfs tools appear to be the same version (1.3), but the wnr1000 uses
a non-standard squashfs magic.
Original comment by [email protected]
on 5 May 2012 at 12:37
from firmware-mod-kit.
I was more concerned about x64 platforms and even embedded systems running ARM.
If I take the time, I could figure this out, but given my responsibilities,
it'd be stupid of me.
Original comment by [email protected]
on 6 May 2012 at 7:55
from firmware-mod-kit.
Related Issues (20)
- mkcramfs-lzma
- Checksums don't match after build
- Fails to compile on Arch x64
- can we extract this firmware file
- extract openwrt ERR No supported file system found!
- Autoconf not listed in prerequisites guide
- Tenda N300 firmware binary - no supported filesystem found.
- Python 2 dependencies HOT 1
- unable to build jffs2 filesystem ... HOT 3
- Add support for UBI filesystems? (Linksys WRT32X)
- Unable to build Zlib HOT 1
- extract-firmware.sh DVRF_v03.bin Tools build failed! Check pre-requisites. Quitting... HOT 2
- Release a new version?
- Extraction error also compliance HOT 3
- Unsupported file system 'mpfs'! Quitting...
- "No supported filesystem found" with Trendnet THA-101 firmware HOT 1
- squashfs-4.0-realtek
- add support for hg630v2
- Installation HOT 1
- Firmware version incorrect after modification
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from firmware-mod-kit.