Feature request : Somehow be able choose overlapping zones ? about altsnap HOT 8 OPEN

not yet read but just based on your title;

ZSnapMode=0
; Zone snapping strategy
; Set to 0 to snap to the zones pointed by the cursor (default).
; Set to 1 to snap to the zone which center is the nearest from the cursor
; There is always a the InterZone tolerance to snap to several zones.

from altsnap.

Ok, giving this a try

First I create two new "full width" zones
And also I create two testing "drop zones"

Here is what is looks like (See zone list below)

Here is trying to snap this as is

With

ZSnapMode=1

Oops, the testing "drop zones" are causing issue

I have now removed them

So, here we have the 8 original zones, plus two wide zones

Here is the result

Here is the behaviour difference, Zsnap

So the following is no longer possible directly

It would be sweet to have custom drop zones that are independant from the actual snap location.
But ZSnapMode=1 is doing mostly what I want thanks !

So, just another suggestion for the backburner but this works for me right now !

Thanks !

Here is the zone list

Zone0=0,1055,3840,2111,
Zone1=0,1,3840,1055,
Zone2=2875,1,3840,1055,
Zone3=1920,0,2875,1055,
Zone4=964,0,1920,1055,
Zone5=0,1,964,1055,
Zone6=1256,1101,1627,1252,
Zone7=1255,868,1626,1019,
Zone8=2875,1055,3840,2110,
Zone9=1920,1055,2875,2110,
Zone10=964,1055,1920,2110,
Zone11=0,1055,964,2110,
Zone12=3406,-1105,3840,-50,
Zone13=3406,-2160,3840,-1105,
Zone14=0,-1105,533,-50,
Zone15=0,-2160,533,-1105,
Zone16=533,-2160,3406,-1105,
Zone17=533,-1105,3406,-50,
Zone18=-1718,1056,0,2111,
Zone19=-1718,1,0,1056,
Zone20=-3152,1,-1718,1056,
Zone21=-3152,1056,-1718,2111,
Zone22=-3840,1056,-3152,2111,
Zone23=-3840,1,-3152,1056,
Zone24=6991,1056,7680,2111,
Zone25=6991,1,7680,1056,
Zone26=5557,1056,6991,2111,
Zone27=5557,1,6991,1056,
Zone28=3840,1056,5557,2111,
Zone29=3840,1,5557,1056,

from altsnap.

However I would like to be able to have a larger snap zone of the full width, top and bottom

You can Hold Ctrl and extend the window to several zones.

You can change snap layout with a command lie parameter.

Also I do not understand your layout, you should only have 8 zones + 2 large zones + 2 thinny cute windows = 12 zones, not 30!

from altsnap.

Thanks !

I just tried with CTRL but the "wide overlapping" zones override the CTRL

It is not a big deal, but I think it is the wide zones or the center zones but switching better probably can't be done on the fly.

Except maybe switching the Zsnapmode via the command line. But I don't have an obvious way to trigger this change in an ergonomic way. So in those cases I will just resize the window.

As for my zones, I cropped out the other monitors for brevity but forgot to remove them from the zone definition

Here is what the whole looks like

from altsnap.

There are also the while moving actions.
Setting a button to maximize vertically will resize the window horizontally while snapping (shift invert).

I snap the window into the left upper zone and then press MB5 while still holding the window with shift+leftclick:

from altsnap.

I am not sure what the issue is with your snap layout, but AltSnap will choose the union of all rectangles which center are within the InterZone tolerance. So in your case everything is logically expected.

When you aim between the two top-middle zones, then you are precisely pointing at the zone that covers the whole top-half screen (defined in your zones), and when you aim at the very middle of the screen, the closest zones are the two wide ones and the union of both of them is the whole screen.

from altsnap.

In your case you might be interested in using UseZones=5 and then only define non-overlapping zones and then the window will extend automaically when you drag the cursor without having to bother with Ctrl. the final rectangle will be the union of the rectangle your cursor starts in and the one you finish with (a bit like e selection rectangle).

from altsnap.

Thanks for mentionning the InterZone setting

I bumped that to

InterZone=128

For my 4K screen and it has become much more please to snap accross sections.

It took some taking used to. But now I can even snap the middle regions with some fiddling and CTRL.

I didn't enables Zones=5 as most of the time I don't want to stretch accross all zones that I pass over while in snap mode

from altsnap.