Crash when used alongside BLE libraries about dmd32 HOT 5 OPEN

Unfortunately I didn't try the library with the built-in ble

from dmd32.

The problem with the hardware timer, just change the hardware timer from 0 to 1 or 2

from dmd32.

I will try that when I have the panels on hand and come back with feedback. Thanks.

from dmd32.

I am not sure if this was what you are suggesting but I changed timer = timerBegin(0, cpuClock, true); to timer = timerBegin(1, cpuClock, true); in my sketch and saw some improvement - now the crash is not on startup and I can display some stuff with dmd while still using bluetooth. However, after some time the code crashes with the same message.

I will also try hardware timer 2 some time later.

Do you know if there is some other hardcoded mention or use of the 0 timer?

from dmd32.

@BodoMinea hi u find any solution about crashing. bcz i am facing same issue . i m using dmd32 with espNow . for wireless display.

from dmd32.