Comments (5)
benjycov
commented on August 16, 2024
Hi Julian,
I actually ditched the Gardena scheduler and use the schedular card (
https://github.com/nielsfaber/scheduler-card
) in HA to activate the Gardena valves.
Thus I get visibility of what happened in HA.
I still use the Gardena schedular to tell me what to do ie water in the
evening, 5 minutes then wait and then 20 minutes, etc. Then replicate in HA
and disable in Gardena.
I hope that helps.
Regards… Ben
…On Wed, 31 May 2023 at 10:02, JulianPSLearner ***@***.***> wrote:
Hi guys,
I use the smart watering device and it does a great job. I can also start
the watering via Home Assistant.
I created a time schedule within the Gardena App. So the watering starts
every day for 30 minutes.
Problem: It seems that whenever the watering device is triggered via app -
there is no sync back to Home Assistant.
I would like to see whenever watering took place in Home Assistant.
Is this possible?
—
Reply to this email directly, view it on GitHub
<#175>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AQZVQ2DKOQ5VHOPASEDHZC3XI33KJANCNFSM6AAAAAAYVCC2ZY>
.
You are receiving this because you are subscribed to this thread.Message
ID: ***@***.***>
from hass-gardena-smart-system.
JulianPSLearner
commented on August 16, 2024
Thank you Benjycov,
I will go the same route. Is there any error handling in case the watering does not work for some reason?
Lets say I closed the main water valve. I then trigger the watering - do I get a notification if for some reason the watering didnt work?
from hass-gardena-smart-system.
benjycov
commented on August 16, 2024
Hi Julian,
Well I don't think you do with Gardena, I don't think it can actually sense
whether water has actually passed through the valve?
Alas I do have a solution.... I have a water meter on the main supply to
the irrigation valves that is also integrated into HA. What I then do is
whenever a valve is activated I assign all water usage on the main meter to
a virtual meter for that valve, end result I can see how much water each
zone/subzone has used per day. This tells me both if a circuit has had
water and also if its used too much (a leak), I actually also have some
hard limits in place on each circuit based on typical use.
[image: image.png]
Regards... Ben
…On Wed, 31 May 2023 at 09:18, JulianPSLearner ***@***.***> wrote:
Thank you Benjycov,
I will go the same route. Is there any error handling in case the watering
does not work for some reason?
Lets say I closed the main water valve. I then trigger the watering - do I
get a notification if for some reason the watering didnt work?
—
Reply to this email directly, view it on GitHub
<#175 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AQZVQ2AQPKPKDHMETMGM6XLXI35EJANCNFSM6AAAAAAYVCC2ZY>
.
You are receiving this because you commented.Message ID:
***@***.***
com>
from hass-gardena-smart-system.
JulianPSLearner
commented on August 16, 2024
I have the exact same plan! Unfortunately I don't see the image you attached.
Which valve do you use? I ordered the HomeWizard Water meter. Which one do you have?
My plan is after a watering session ( I have house water / garden water separated) I want to send myself a Home Assistant Push Notification telling me what the watering I just did costs :-) So I will multiply my water consumption with the current price.
I hope this sensitizes me regarding my water consumption.
Do you use any other valves in your gardeN?
from hass-gardena-smart-system.
benjycov
commented on August 16, 2024
Hi Julian,
Ah apologies, it was only a screenshot of my dashboard showing individual
watering circuit daily usage.
I use regular off the peg water meters with a built in pulse sensor, so for
every liter used I get a close/open on a circuit which I then detect with
an ESP board..
I am slowly moving away from Gardena, at one house I still use their
valves, here in France I am using the moisture sensors but actually use
standard 24V actuators off a water manifold, I then control the actuators
using ESPHome.
I get push notifications when a circuit uses too much water - I had a nasty
incident where a circuit didn't close and it used 13000lts of water before
I realised! :)
Regards... Ben
…On Wed, 31 May 2023 at 09:51, JulianPSLearner ***@***.***> wrote:
I have the exact same plan! Unfortunately I don't see the image you
attached.
Which valve do you use? I ordered the HomeWizard Water meter. Which one do
you have?
My plan is after a watering session ( I have house water / garden water
separated) I want to send myself a Home Assistant Push Notification telling
me what the watering I just did costs :-) So I will multiply my water
consumption with the current price.
I hope this sensitizes me regarding my water consumption.
Do you use any other valves in your gardeN?
—
Reply to this email directly, view it on GitHub
<#175 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AQZVQ2BBWEXMRHRUTGOEY3LXI4BCNANCNFSM6AAAAAAYVCC2ZY>
.
You are receiving this because you commented.Message ID:
***@***.***
com>
from hass-gardena-smart-system.
Related Issues (20)
- Some Warnings
- Gardena Smart System Integration startet nicht mehr HOT 4
- I got this problem, since a few days. Can anyone help me? HOT 7
- get error when adding integration HOT 4
- Values which will be removed in HA Core 2025.1 HOT 2
- Gardena integration not available/loaded HOT 22
- The method for providing platform translations has changed in Home Assistant Core HOT 2
- Invalid flow specified HOT 5
- Gardena - Needs attention HOT 13
- Supported Feature will be removed in 2025.1 HOT 7
- Need possibility to start stop mower with or not schedule HOT 1
- Initialization failed
- Added and installed integration, but no setup or Gardena available HOT 2
- How to install v. 1.10 or beta? HOT 3
- Not refreshing values on humidity sensor HOT 10
- Please update version number.
- Error starting integration HOT 1
- Randomly stops updating? HOT 9
- Gardena sensor wrong device class humidity instead of moisture
- ReadTimeout Error while running automation HOT 18
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from hass-gardena-smart-system.