wine in box86 v0.3.0 can't get drives in winecfg about box86 HOT 7 OPEN

I tested on my side with both v0.3.0 and current master and I could not reproduce. Are using an already crreated prefix or is it a new one?

from box86.

I just found in box86 v0.3.0. When first run wine, wine will prompt "Wine Mono Installer", press Cancel, then this bug will appear.
If i press install then wine works fine.
but box86 v0.2.8 doesn't has this problem ,maybe wine's bug.

from box86.

Are you using Linux machine or Android one and Termux/proot/chroot?

from box86.

My hardware is raspberry 2b and raspberry 400, all have this problem.
wine version is 8.5
system is Archlinux

from box86.

I have this problem when using Box86 in chroot/proot environments, to solve it, you need to disable dynarec to have access to the mount manager.

from box86.

I have this problem when using Box86 in chroot/proot environments, to solve it, you need to disable dynarec to have access to the mount manager.

Did you build box86 with BAD_SIGNAL for termux?

from box86.

Did you build box86 with BAD_SIGNAL for termux?

Hello, yes, the parameters I used were these: cmake .. -DSD845=1 -DARM_DYNAREC=ON -DBAD_SIGNAL=1 -DCMAKE_BUILD_TYPE=RelWithDebInfo

I installed some versions of Wine, they were: 6.0, 6.17, 7.1 and 7.20, only in 6.0 the mount manager worked, in the other versions I had to deactivate Dynarec to have access to it.I used proot-distro and installed Ubuntu Jammy.

from box86.