Closing Stream Dialog causes segmentaion fault about ostinato HOT 6 CLOSED

pjyoung311,

If you are using r59ec or ra140 revision of the code, please pull from the repo 
- I 
committed a fix for a similar problem in r78cd

If you are using the latest revision (r78cd as of this writing), then can you 
please 
provide the following information -
1. Does it happen everytime? With every stream?
2. List down all steps that you take while configuring the stream (protocol 
selection, changing protocol field values etc)
3. What version/revision of the code are you using?

Can you try running the client in gdb and send me the backtrace?

Please include any other relevant info that will help me in recreating the 
problem.

Regards,
Srivats

It will be a couple of days before I can get in the lab to try this again.  But,
here's some more more info that I can offer quickly...

* I was using the latest revision as of yesterday (5/14/2010). 

* I'm running this on 64 bit CentOS.

* I would choose a port, create the stream, fill in a couple of protocols (Eth 
II,
IP, UDP) and fill in Ethernet and IP addresses and click OK.  This is where I 
got the
segfault.  I couldn't create the first stream.  I also tried just filling in the
protocols (without specifying adresses) with the same result.

It looks like you have made a good start to a very useful app here...

This issue was closed by revision 332a921c0b.

pjyoung311,

I've fixed the segfault. Please try again with r332a.

Srivats

Yes, this is now fixed.

@pjyoung311: Thanks for the confirmation and the words of encouragement :-)