Comments (19)
Cannot confirm. What type of board are you using? I tried 3 different sabers with the new code, all work fine after sleep mode. Is also not logical, sleep mode and clashes have nothing in common.
from fx-saberos.
This is on a stardust. Single Button, Star Led
Trying to figure out my other problem with swing detection, i decided to wire up my second Stardust. Now it wont come out of sleep mode and i can not replicate the bug. I seem to be having lots of fun, while others are seemless =( Closing since i can not replicate now.
from fx-saberos.
Interesting, I have another saber which also will not wake-up... first I though it has to do with some of the changes I implemented for someone who wished to have staggered ignition for a Kylo Ren saber. Totally interesting, I have no clue at the moment, as my other sabers which all have the same code (mixed Prime and Stardust boards) do not experience the same problem.
I guess not many people use sleep mode, mostly they still use kill keys. Hm, strange, I did not touch the sleep mode code at all and it worked already since LSOS times... I need to have a look at it.
from fx-saberos.
BTW, I had a same saber, single button, Stardust, Star LED. I can wake that one up. I hope it will not develop into a similar problem which kept haunting me where suddenly the sound was gone without any apparent reason.
from fx-saberos.
Today I uploaded the same code again to the saber I could not wake up and now it works...strange. But to be on the same side I added to the sleep entry function again the setting that the main button press wakes up the saber. Try out and feedback to me about how it works for you.
from fx-saberos.
Sadly this is not working either =(
from fx-saberos.
What does not work? The saber still does not wake up after going into sleep mode? Hm, it gets stranger and stranger, because you seem to be the only one with the problem...can you send me a wiring picture of your Stardust boards?
from fx-saberos.
It wont wake, Still cant replicate the very first "Bug"
Let me know if you need different angled shots
from fx-saberos.
Does the problem with the sleep mode entry still persist? Or has that one got solved with the MPU topic too?
from fx-saberos.
It is still not working. I hadn't been working on electronics, as I was making hilt, pics to come. Now that I'm finished I can focus on it a little more. But no, solving the mpu issue did not solve this at the same time. (I was hoping too) Tonight I'll try with my other star dust to see if it works on that one.
from fx-saberos.
Working!!! I added an extra led off Ls1 Ls2 and ls3 for my accent light. That way it does what the blade does. Anyways when I soldered that in, It corrected the sleep mode not waking up. 100%
from fx-saberos.
Is the accent light suppose to be on in sleep mode?
from fx-saberos.
Actually not. But I do not have a Stardust saber with an accent LED, only a Prime based saber. So it well might be that if a different pin is used it remains on during sleep mode. From which pin do you drive your accent LED? Is it a single accent LED to drive a button LED?
from fx-saberos.
I use a single green led off the A0 pin per the wiki default pin for fx saber os. Currently it's just an led accent light, not on a button. Since it stayed on all the time, I took out my led button
from fx-saberos.
from fx-saberos.
Can I reassign led accent pin to A1 or A2 in the code and on board?
from fx-saberos.
from fx-saberos.
I do use single button. Just trying alternate options to keep sleep mode as optimal as possible. I may also just use a kill key or a switch to save battery.
Only issue with sleep mode being you have to put it in sleep mode for it to work, and I forget almost every night.
from fx-saberos.
from fx-saberos.
Related Issues (20)
- Flame effects HOT 2
- button HOT 3
- NPXL pcb wiring
- No sound - Speaker without amplifier or additional power? HOT 3
- hum loop cut HOT 1
- problem with the two buttons config
- Sound problem with the Config Mode HOT 2
- problem with arduino nano and mpu HOT 2
- Problem with the MP3-TF-16P sound HOT 4
- sound problems HOT 2
- Exceeds available space on Nano with DIYINO_PRIME and PIXELBLADE HOT 2
- Df player freezes and resets HOT 9
- Button HOT 4
- Boot sound not playing HOT 8
- Possible to change mainColor to being set by RGB sensor module? HOT 4
- Issue compiling HOT 1
- Crossguard Saber HOT 2
- Lockup on clash HOT 2
- No audio, button doesn't work, LED strip lights up red HOT 3
- Hum and development HOT 10
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from fx-saberos.