mismatched hardware address sizes about naabu HOT 8 CLOSED

I'm working on a fix that should be available shortly, scanning 10.x.x.x range seems to work properly on a fresh kali installation with active OpenVPN connection to HTB. Could you confirm if the routing table of your kali system is similar to this?

# route -n
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
0.0.0.0         10.0.2.2        0.0.0.0         UG    100    0        0 eth0
10.0.2.0        0.0.0.0         255.255.255.0   U     100    0        0 eth0
10.10.10.0      10.10.14.1      255.255.255.0   UG    0      0        0 tun0
10.10.14.0      0.0.0.0         255.255.254.0   U     0      0        0 tun0

Thanks for your help!

from naabu.

Hi @galimba, thanks for reaching out!

it seems like an internal routing error due to OpenVPN virtual interface. Are you facing the same issue with any kind of ips (eg. Lan, Internet)? I will try to reproduce the issue, and implement a fix

from naabu.

yeah, I thought it was because of OpenVPN... the issue only happens while I'm on a VPN, tried it on my dayjob VPN and got the same error.
Lan / Internet works just fine

from naabu.

Tried from VPS, but got same error

from naabu.

Perhaps it's got something to do with virtualization... I'm not running kali on bare metal

from naabu.

Hi @galimba @bsysop this issue should be fixed in the latest release. Let me know if that works!

from naabu.

Fix confirmed from VPS! Thanks

from naabu.

Thank you for the confirmation @bsysop, closing this issue.

from naabu.