[BUG]: about python-plugwise HOT 13 CLOSED

is not available   This is de log in the previous (working) version:{  "home_assistant": {    "installation_type": "Home Assistant OS",    "version": "2022.10.5",    "dev": false,    "hassio": true,    "virtualenv": false,    "python_version": "3.10.5",    "docker": true,    "arch": "aarch64",    "timezone": "Europe/Amsterdam",    "os_name": "Linux",    "os_version": "5.15.61-v8",    "supervisor": "2022.10.2",    "host_os": "Home Assistant OS 9.3",    "docker_version": "20.10.18",    "chassis": "embedded",    "run_as_root": true  },  "custom_components": {    "hacs": {      "version": "1.24.5",      "requirements": [        "aiogithubapi>=21.11.0"      ]    }  },  "integration_manifest": {    "domain": "plugwise",    "name": "Plugwise",    "documentation": "https://www.home-assistant.io/integrations/plugwise",    "requirements": [      "plugwise==0.21.4"    ],    "codeowners": [      ***@***.***",      ***@***.***",      ***@***.***",      ***@***.***"    ],    "zeroconf": [      "_plugwise._tcp.local."    ],    "config_flow": true,    "iot_class": "local_polling",    "loggers": [      "crcmod",      "plugwise"    ],    "is_built_in": true  },  "data": {    "gateway": {      "smile_name": "Adam",      "gateway_id": "a61cffe2806b4b1aaf7748c768f63349",      "heater_id": "78061dfa9fd04318a9b4df712e69261a",      "cooling_present": true,      "notifications": {}    },    "devices": {      "78061dfa9fd04318a9b4df712e69261a": {        "dev_class": "heater_central",        "location": "4e9d442ceca54ff996ce7dca8467d317",        "model": "17.1",        "name": "OpenTherm",        "vendor": "Remeha B.V.",        "maximum_boiler_temperature": {          "setpoint": 44.0,          "lower_bound": 25.0,          "upper_bound": 45.0,          "resolution": 0.01        },        "domestic_hot_water_setpoint": {          "setpoint": 54.0,          "lower_bound": 40.0,          "upper_bound": 60.0,          "resolution": 0.01        },        "binary_sensors": {          "dhw_state": false,          "heating_state": false,          "cooling_state": false,          "flame_state": false        },        "sensors": {          "water_temperature": 24.6,          "intended_boiler_temperature": 0.0,          "modulation_level": 0.0,          "return_temperature": 24.6,          "water_pressure": 1.7,          "outdoor_air_temperature": 7.25        },        "switches": {          "dhw_cm_switch": false        }      },      "a61cffe2806b4b1aaf7748c768f63349": {        "dev_class": "gateway",        "firmware": "3.6.7",        "hardware": "AME Smile 2.0 board",        "location": "4e9d442ceca54ff996ce7dca8467d317",        "mac_address": "D40FB201C418",        "model": "Adam",        "name": "Adam",        "zigbee_mac_address": "000D6F000D5A3DF3",        "vendor": "Plugwise B.V.",        "regulation_mode": "heating",        "regulation_modes": [          "heating",          "off",          "bleeding_cold",          "bleeding_hot",          "cooling"        ],        "binary_sensors": {          "plugwise_notification": false        },        "sensors": {          "outdoor_temperature": 9.19        }      },      "08ad5d11fbae47baa6efe60554c97c7d": {        "dev_class": "thermostat",        "location": "a1658ed2ddfe45ae8f65485093b6550f",        "model": "Anna",        "name": "OpenThermThermostat",        "vendor": "Plugwise B.V.",        "thermostat": {          "setpoint": 20.0,          "lower_bound": 1.0,          "upper_bound": 35.0,          "resolution": 0.01        },        "preset_modes": [          "home",          "asleep",          "away",          "no_frost"        ],        "active_preset": "home",        "available_schedules": [          "Thermostat schedule"        ],        "selected_schedule": "Thermostat schedule",        "last_used": "Thermostat schedule",        "control_state": "off",        "mode": "auto",        "sensors": {          "temperature": 21.5,          "setpoint": 20.0        }      }    }  }} On Friday, November 11, 2022 at 04:46:28 PM GMT+1, Bouwe Westerdijk ***@***.***> wrote: Can you please share the diagnostics info of the Plugwise integration? — Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you authored the thread.Message ID: ***@***.***>

1 yes I have 'cooling feature' upgrade  2 yes I have an empty schedule Schedule is in Home Assistant  Sent from Yahoo Mail on Android On Sat, Nov 12, 2022 at 9:12, Bouwe ***@***.***> wrote: Ok, thanks! Two questions: - from the data I can see that there is cooling capability, is that correct? - I see you have a Thermostat schedule is that one maybe empty? — Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you authored the thread.Message ID: ***@***.***>

Hoi Bouwe,Schema van zowel Adam als Anna zijn leeg.Hierbij de xml data. Zie bijlage On Saturday, November 12, 2022 at 03:33:29 PM GMT+1, Bouwe Westerdijk ***@***.***> wrote: You can help me by sending me some raw xml-data from your system: can you please capture the xml-data present at http://<adam_ip>/core/domain_objects? Please do this via right-click -> Save as -> .xml Please send the resulting file to my email: bouwe at westerdijk point info (change this into a real email address). — Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you authored the thread.Message ID: ***@***.***>

vorige domain_objects was van de oude versie van HA.Ik weet niet of het uitmaakt, maar hierbij dezelfde domain_objects bij HA versie Home Assistant 2022.11.2 On Saturday, November 12, 2022 at 09:03:55 PM GMT+1, Ruud Verkerk ***@***.***> wrote: Hoi Bouwe,Schema van zowel Adam als Anna zijn leeg.Hierbij de xml data. Zie bijlage On Saturday, November 12, 2022 at 03:33:29 PM GMT+1, Bouwe Westerdijk ***@***.***> wrote: You can help me by sending me some raw xml-data from your system: can you please capture the xml-data present at http://<adam_ip>/core/domain_objects? Please do this via right-click -> Save as -> .xml Please send the resulting file to my email: bouwe at westerdijk point info (change this into a real email address). — Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you authored the thread.Message ID: ***@***.***>

Bedankt! Ik ga er naar kijken. Ter info, de Plugwise xml-data is volledig losgekoppeld van HA, de inhoud van de beide gestuurde bestanden is gelijk. Je schrijft zowel Adam als Anna. Betekend dat je ze beide in de Plugwise App hebt staan? Dat is niet nodig, de enige die je nodig hebt, is de Adam. De Anna is een "slaaf" van de Adam geworden, deze is alleen nog maar een "domme" thermostaat, alle besturing wordt gedaan vanuit de Adam. Groet, Bouwe Groet, Bouwe

Thanks!Good work.Is the library update an HA update? Or an Plugwise update? Sent from Yahoo Mail on Android On Sun, Nov 13, 2022 at 10:10, Bouwe ***@***.***> wrote: @ruute66 I can reproduce your problem with the library-code that's in HA Core at the moment. I also see that the problem is gone with the code that will be in the coming library-update. — Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you were mentioned.Message ID: ***@***.***>