Is the screen UI suitable for the mks TFT 35 LCD? about arduino-esp32_cnc3018 HOT 1 OPEN

Sorry, it's not that simple.

The MKS dlc32 motherboard is based on the predecessor to FluidNC ... previously known as GrblEsp32 ... The MKS dlc32 motherboard is based on old code.

All of the source code for interfacing my FluidNC_UI library to my fork of the FluidNC library IS ALREADY OPEN SOURCE, and available at:

https://github.com/phorton1/Arduino-libraries-FluidNC_UI

so I have already "shared" it.

It would be up to you, or the developer of the MKS dlc32 motherboard, to upgrade to my fork of FluidNC and integrate the FluidNC_UI user interface.

But I really doubt the developer wants to do that, since:

(a) my fork of FluidNC is already out of date and significantly denormalized from the main fork,
(b) he already has some kind of a touch screen UI
(c) he has probably already denormalized his old fork of GrblEsp32 to begin with, and so,
(d) it would be large amount of work ... months ... to upgrade his whole project from GrblEsp32 to my fork of FluidNC and learn, and integrate, the FluidNC_UI

I suppose you could try to build and modify my cnc3018 firmware and burn it to the MKS dlc32 motherboard, it should work with some relatively minor modifications.

All the instructions for building it are on the github pages.

from arduino-esp32_cnc3018.