does not work ENABLE_TX_WHEN_AM := 0 allow TX (always FM) when RX is set to AM about uv-k5-firmware-custom HOT 27 CLOSED

There is still a slight problem with TX'ing when dual-watch is enabled. I'll find the bug, just trying to chill today, so being lazy :)

from uv-k5-firmware-custom.

if it's set to '0', then it should always say TX DISABLED if you try and transmit on a channel/freq that is set to AM mode ?

from uv-k5-firmware-custom.

if it's set to '0', then it should always say TX DISABLED if you try and transmit on a channel/freq that is set to AM mode ?

TX on an FM band.. will work if no AM trans or no AM trans for quite some time.. BUt if there has been an AM tran it will either take 20-30s before I can TX or will not let me till I reboot radio... Noticed it the other day but forgot to mention. To day was using K5 and was listeninig on AM and FM but could not trans on FM band when I needed

from uv-k5-firmware-custom.

oh right, it wasn't letting you TX on an FM chan/freq .. okey doke

from uv-k5-firmware-custom.

oh right, it wasn't letting you TX on an FM chan/freq .. okey doke

It used to work.. so it is a recent thing(I think lol)

from uv-k5-firmware-custom.

I did recently edit that bit of code, I'll go look in a bit, doing too many things at once at the mo

from uv-k5-firmware-custom.

I did recently edit that bit of code, I'll go look in a bit, doing too many things at once at the mo

LOL thats what happens when you have possible the best FW for the K5/6 range lol

Whilst it is import, Just take your time buddy.. I can work with it for now...

from uv-k5-firmware-custom.

:)

I think I've fixed it, let me know if not

from uv-k5-firmware-custom.

:)

I think I've fixed it, let me know if not

stows as TXing but nothing is actually happening.. And now actually notice that I am not recieving FM trans from other radios... Must be due to AM

from uv-k5-firmware-custom.

I don't suppose you can do a quick video ?

from uv-k5-firmware-custom.

I don't suppose you can do a quick video ?

just flashing stock.27

from uv-k5-firmware-custom.

confirmed the issue is still on .27 I suspect it possibly due to switching modulation from FM to AM and back.. so possible not fixable

from uv-k5-firmware-custom.

slightly offtopic but just been posted in telegram group

Bricky, [28/09/2023 19:06]
Think I noticed a mistake in 1o11's lower squelch-1 code. The close RSSI is bigger than the open when it's not airband. Changing it to be smaller makes my radio closer to what my stock 5R picks up.

Bricky, [28/09/2023 19:07]
I'm glad I have a supermarket warehouse nearby to test it out. Spent way too much time trying to make it better.

from uv-k5-firmware-custom.

The NOISE and GLITCH squelch setting are the inverse of the RSSI squelch.
so ..
Lower RSSI value = more sensitive squelch.
Higher NOISE value = more sensitive squelch.
Higher GLITCH value = more sensitive squelch.

from uv-k5-firmware-custom.

Not sure if I'm missing something but I can't reproduce this on latest git build.

from uv-k5-firmware-custom.

Not sure if I'm missing something but I can't reproduce this on latest git build.

set chan 1 to AM band

now set chan to to any FM (You can switch the chans it makes no dfference)

Make sure your TX chan is the Fm one

Now trans

Now try trans during or just after an AM RX

it will fail and it will either continue to fail(warning text states TX disabled) or after a 10-20 seconds you can TX again providing you had not RX any further AM band

I fond this happened on even Stock so I would guess it ia a limitation due to the fact it does not have a true AM chip

from uv-k5-firmware-custom.

Is Dual-RX (Dual Watch, TDR) enabled, and if it is, which is set to the main one (solid black little triangle marker) ?

from uv-k5-firmware-custom.

Is Dual-RX (Dual Watch) enabled, and if it is, which is set to the main one (solid black little triangle marker) ?

For me with or withot dual watch it happens. the main channel wil always be FM for trans(Black triangle) I never trans on AM band... I have a proper HT for that

from uv-k5-firmware-custom.

The radio does as you say if dual-watch is enable, when it stops/pauses on the AM channel/VFO thats when the TX is disabled when you try to transmit.

If I disable dual-watch, the 'problem' vanishes because you will always transmit on the FM channel.

from uv-k5-firmware-custom.

I'll have to see how the original QS firmware operates.

from uv-k5-firmware-custom.

I'll have to see how the original QS firmware operates.

Actually stated it is the same (see above)

from uv-k5-firmware-custom.

I can't reproduce this when dual-watch is disable :(

from uv-k5-firmware-custom.

I can't reproduce this when dual-watch is disable :(

hmmmmmmmmmmmmmm odd but ok..

Actually not odd really as DW watch is listen to two channels where as no DW means you are only listenning on highlighted channel... BUt If I flick back to the AM channel it does happen fromtime to time... But on DW it always happens regardless .

from uv-k5-firmware-custom.

Try it now, just uploaded

from uv-k5-firmware-custom.

Try it now, just uploaded

Given the AM issues on current FW's for me I am now using older comps, So even though there is the issue (but not a major one) I don't use newer builds....

from uv-k5-firmware-custom.

okey doke

from uv-k5-firmware-custom.

I don't use DW, might be why I couldn't reproduce. Will try after the compile errors are fixed.

from uv-k5-firmware-custom.