Comments (44)
Can you enable debug log for the component adding this lines in configuration.yaml (please check that logger:
option is not already present, in case just add the other lines):
logger:
default: info
logs:
custom_components.samsungtv_smart: debug
Then please post the log related to the component so that I can try to understand where is the issue.
from ha-samsungtv-smart.
Hello, hope this is what you mean / need:
from ha-samsungtv-smart.
Yes, info is correct. Looking at the log seems that app_list is never send back after request.
Just to better understand, are you able to send command to the TV (eg. Volume Up - Volume Down, play / pause, etc)?
from ha-samsungtv-smart.
Yep, I’ve added the generated entity as a media card in HA and can turn tv on, control volume, pause and change source
from ha-samsungtv-smart.
It will be hard for me solve this, it seems that the standard command do not provide any answer, as always probably samsung change something with last models.
I can try to make some test but I need your support, are you available to install some beta version that I will release on next days and report your feed-back?
from ha-samsungtv-smart.
yep I would be more than happy to help if you dont mind. As you can see I am not the greatest at HA but would love to help get this resolved.
from ha-samsungtv-smart.
Please install last version released and post again debug log. I don't think this version will solve your issue, but I moved start of comunication channel and I want to see if your TV provide back some information.
from ha-samsungtv-smart.
Thanks. Just to check should I uninstall the old version etc or just update?
from ha-samsungtv-smart.
Just update
from ha-samsungtv-smart.
Here you go, hope this helps
from ha-samsungtv-smart.
Did the above help at all?
from ha-samsungtv-smart.
Not so mutch, I see that other channels starts but nothing more is coming. I have to try moving the call for channel list, but maybe nothing will change.
Unfortunatly my TV is out of order from this week, axactly 2 months after end of warranty, so I cannot do nothing until I will have it back or I will have a new one.
from ha-samsungtv-smart.
Hi, sorry for late answer.
I did some check, unfortunatly I didn't find a definitive solution. Simply there are some TV model that do not report application list.
In any case I reviewed in last release the method used to check running app, so if you create your app_list in configuration.yaml (see read_me instruction) you should be able to use and see status of app in your list.
Waiting for your feed-back.
from ha-samsungtv-smart.
Hi,
Just to update this, have the same issues on a 2020 Frame (QE55LS03TAUXXU)
@ollo69 adding the new app list to config as you suggested does then allow you to switch between apps from HA as well as get the correct read back on the app name
samsungtv_smart:
- host: xx.xx.xx.xx
app_list: '{"Netflix": "11101200001", "YouTube": "111299001912", "Spotify": "3201606009684", "Internet": "org.tizen.browser" }'
I've had no luck casting anything or opening any media from HA to this model though.
(Sorry to hear about your TV :( )
from ha-samsungtv-smart.
@louisc just checking you added that code within your configuration.yaml for HA did you? Will try this on mine later
from ha-samsungtv-smart.
Indeed @mbarnes106 , just paste as is and add your host. You can pull additional apps and IDs from the links in the docs here: https://github.com/ollo69/ha-samsungtv-smart/blob/master/docs/App_list.md (select the lists)
from ha-samsungtv-smart.
I just got a Q90T 2020 model and I can't get the app loading functionality to work as well.
from ha-samsungtv-smart.
I have added that to my config. they are a little slow to work but do now change. All apart from Netflix which will let me select it but will not change the tv to netflix
`samsungtv_smart:
- host: 192.168.1.138
app_list: '{"Netflix": "11101200001", "YouTube": "111299001912", "Spotify": "3201606009684", "Internet": "org.tizen.browser" }'
`
from ha-samsungtv-smart.
Just tried this as well:
"Netflix": "11101200001/org.tizen.netflix-app"
Still just netflix that will not load.
from ha-samsungtv-smart.
And sorry one more thing while I am trying to sort this all. Is there a way to rename the HDMI1 / 2 / 3 / 4 sources to things like Xbox and Sky etc?
I thought this would work but it does not rename them in the source list and fails to change the source when I select them
source_list: '{"HDMI1": "Sky", "HDMI2": "Apple TV", "HDMI3": "Nintendo", "HDMI4": "Xbox"}'
from ha-samsungtv-smart.
@mbarnes106 try this
source_list: '{"ST_HDMI1": "Sky", "ST_HDMI2": "Apple TV", "ST_HDMI3": "Nintendo", "ST_HDMI4": "Xbox"}'
from ha-samsungtv-smart.
@mbarnes106 try this
source_list: '{"ST_HDMI1": "Sky", "ST_HDMI2": "Apple TV", "ST_HDMI3": "Nintendo", "ST_HDMI4": "Xbox"}'
That doesnt work I am afraid, that renames all the sources as ST_HDMI1 etc.
from ha-samsungtv-smart.
@mbarnes106 try this
source_list: '{"ST_HDMI1": "Sky", "ST_HDMI2": "Apple TV", "ST_HDMI3": "Nintendo", "ST_HDMI4": "Xbox"}'That doesnt work I am afraid, that renames all the sources as ST_HDMI1 etc.
Changed them round, the description should come first, Samsung name second, so this works.
`
samsungtv_smart:
- host: 192.168.1.138
source_list: '{"TV": "ST_TV", "Sky": "ST_HDMI1", "Apple TV": "ST_HDMI2", "Nintendo": "ST_HDMI3", "Xbox": "ST_HDMI4"}'
app_list: '{"Netflix": "11101200001/org.tizen.netflix-app" , "Plex": "3201512006963", "YouTube": "111299001912", "Prime Video" : "3201512006785", "Spotify": "3201606009684", "Internet": "org.tizen.browser" }'
`
Just wish Netflix would open now
from ha-samsungtv-smart.
I got the app list to work. I'm not 100% sure but I think what fixed the app list functionality for me was to clear out all the devices from the settings in the TV under Device Connect Manager and then restart smart things on my phone and restart HASS.
EDIT : mbarnes106 : I'm using your app_list
. The Netflix option doesn't work.
from ha-samsungtv-smart.
I got the app list to work. I'm not 100% sure but I think what fixed the app list functionality for me was to clear out all the devices from the settings in the TV under Device Connect Manager and then restart smart things on my phone and restart HASS.
EDIT : mbarnes106 : I'm using your
app_list
. The Netflix option doesn't work.
I am using app list in my config yeah. Boo about Netflix! Have you found a way of getting round that?
from ha-samsungtv-smart.
Hi, anyone with the new Samsung tv 2020 is able to run this ?
(Open Netflix)
curl -X POST -i 'http://IP:8001/api/v2/applications/11101200001'
from ha-samsungtv-smart.
Nope can’t load Netflix at all here
from ha-samsungtv-smart.
@mbarnes106 Can you please try this one last time
(Open Youtube)
curl -X POST -i 'http://IP:8001/api/v2/applications/111299001912'
from ha-samsungtv-smart.
Hello,
I have just found your addon, thank you for creation and developing.
I am using 2020 Samsung TV, model: QE55Q80TATXXH with Tizen SW 1460 onboard.
As someone before I could not run any app from HA dropdown list.
I have tested curl from previous message and it’s launching YouTube properly. However Netflix’s curl is having error as response:
But Netflix, YouTube, Browser and AppleTV are recognized after a short time (proper name and logo), turning TV on and off also works but with a big delay. Voice control with tiny.
TV has WiFi 5G Internet, no cable right now.
app_list: '{"Netflix": "11101200001/org.tizen.netflix-app", "YouTube": "111299001912/9Ur5IzDKqV.TizenYouTube", "AppleTV": "com.samsung.tv.aria-video", "Browser": "org.tizen.browser"}'
from ha-samsungtv-smart.
I don't use http post to launch the application but a dedicated ws. Anyway it is a common problem that some time is not possible to launch some application.
You should enable debug for the component in HA and share it so that I can see what is happening..
from ha-samsungtv-smart.
Could you please guide me how to enable debug mode? I am using HA on HassIO (latest versions) and I have installed this component manually via git clone and moving folder to /config/custom_components path.
As a result this integration / component is not visible and I can only use it via configuration.yaml file.
I have tried to add repo to Configuration > Integrations but github address was not recognised as a correct repo (as it does with 99% of repos :) )
from ha-samsungtv-smart.
Could you please guide me how to enable debug mode?
You should add the following line in configuration.yaml
:
logger:
default: info
logs:
custom_components.samsungtv_smart: debug
I have tried to add repo to Configuration > Integrations but github address was not recognised as a correct repo (as it does with 99% of repos :) )
You mean using HACS? You don't need to add this component in HACS, is a default repository.
from ha-samsungtv-smart.
Thank you. I have to update what I said. Somehow I was using wrong component (silly me).
But with yours I can switch to: Browser and Youtube. Netflix and AppleTV are choosen, recognised in HA but nothing happens (TV stays in current app). When I run them via smart remote component recognize all of them.
app_list: '{"Netflix": "11101200001/org.tizen.netflix-app", "YouTube": "111299001912/9Ur5IzDKqV.TizenYouTube", "AppleTV": "com.samsung.tv.aria-video", "Browser": "org.tizen.browser"}'
Edited: I could turn screen off and on. Audio controls are ok.
With integration installed from HACS I could not set up config properly, so I have installed it manually as mentioned previously.
Please find below a bit long log, where mostly around 3:08 I was trying to run every of app_list elements.
Logs.txt.txt
from ha-samsungtv-smart.
With integration installed from HACS I could not set up config properly, so I have installed it manually as mentioned previously.
Can you explain better what was your problem installing from HACS and using Configuration Flow?
from ha-samsungtv-smart.
Hi
I've just bought Samsung this year QE65Q80T model and apps don't show up. Is there any solution for this?
from ha-samsungtv-smart.
I've just bought Samsung this year QE65Q80T model and apps don't show up. Is there any solution for this?
I have a QE65Q82R that work perfectly. Provide more detail on the problem that you have configuring it. Best thing is open a new issue describing what happen.
from ha-samsungtv-smart.
Issue trying to run curl:
{"code":404,"message":"Not found error.","status":404}
Mattb:~ mattbarnes$ curl -X POST -i 'http://192.168.1.138:8001/api/v2/applications/11101200001'
HTTP/1.1 404 Not Found
content-type: application/json; charset=utf-8
content-length: 55
{"code":404,"message":"Not found error.","status":404}
from ha-samsungtv-smart.
But if i try:
curl -X POST -i 'http://192.168.1.138:8001/api/v2/applications/111299001912'
it loads Youtube just fine.
from ha-samsungtv-smart.
I've just bought Samsung this year QE65Q80T model and apps don't show up. Is there any solution for this?
I have a QE65Q82R that work perfectly. Provide more detail on the problem that you have configuring it. Best thing is open a new issue describing what happen.
You got last year tv. In this year Samsung probably changed sometings. I have the same problem as author of this post. Need to manually add applist i cfg.
from ha-samsungtv-smart.
Same issue here with a QE55Q64TAUXZT bought a few days ago.
According to the debug log it looks like the app list is not returned after the request:
2021-01-02 03:32:34 DEBUG (SamsungRemote) [custom_components.samsungtv_smart.api.samsungws] Message remote: received connect 2021-01-02 03:32:34 DEBUG (SamsungRemote) [custom_components.samsungtv_smart.api.samsungws] Request app list 2021-01-02 03:32:34 DEBUG (SamsungControl) [custom_components.samsungtv_smart.api.samsungws] Thread SamsungControl started 2021-01-02 03:32:34 DEBUG (SamsungArt) [custom_components.samsungtv_smart.api.samsungws] Thread SamsungArt started
from ha-samsungtv-smart.
I cannot get any apps either. Any other new suggestions? My config looks like this:
samsungtv_smart:
- host: x.x.x.x
mac: "xx:xx:xx:xx:xx"
app_list: '{"Netflix": "11101200001/org.tizen.netflix-app}' (Tried other lists from above comments too)
from ha-samsungtv-smart.
Hi there,
if it can be any help, same behaviour here: "request app list" in the logs, nothing in return.
Forcing app_list in configuration.yaml doesn't work at all.
{"device":{"FrameTVSupport":"true","GamePadSupport":"true","ImeSyncedSupport":"true","Language":"fr_FR","OS":"Tizen","PowerState":"on","TokenAuthSupport":"true","VoiceSupport":"true","WallScreenRatio":"0","WallService":"false","countryCode":"FR","description":"Samsung DTV RCR","developerIP":"0.0.0.0","developerMode":"1","duid":"uuid:a0dde8a0-x-xx44xxxe9-a1e4-xxxxxx","firmwareVersion":"Unknown","id":"uuid:a0dde8a0-b915-x-xxxxxxa1e4-x","ip":xxxxx"192.168.1.53","model":"20_NIKEM_FRAME","modelName":"QE55LS03TAUXXC","name":"[TV] TheFrame","networkType":"wireless","resolution":"3840x2160","smartHubAgreement":"true","ssid":"24:4b:fe:2e:12:05","type":"Samsung SmartTV","udn":"uuid:a0dde8a0-b915-44e9-a1e4-x","wifiMxxxxxac":"F4:FE:FB:B5:10:09"},"id":"uuid:a0dde8a0-b915-44e9-a1e4-x","isSxxxxxupport":"{"DMP_DRM_PLAYREADY":"false","DMP_DRM_WIDEVINE":"false","DMP_available":"true","EDEN_available":"true","FrameTVSupport":"true","ImeSyncedSupport":"true","TokenAuthSupport":"true","remote_available":"true","remote_fourDirections":"true","remote_touchPad":"true","remote_voiceControl":"true"}\n","name":"[TV] TheFrame","remote":"1.0","type":"Samsung SmartTV","uri":"http://192.168.1.xx:8001/api/v2/","version":"2.0.25"}
from ha-samsungtv-smart.
Closing this issue 1 year old. Many TV do not return app list, this is not an integration issue. Integration allow manual app list creation as work around.
from ha-samsungtv-smart.
Hi. I have the same problem with a QN800A.
from ha-samsungtv-smart.
Related Issues (20)
- Smartthings.md Instructions point to dead link HOT 2
- Google Home CH Up/Down not working HOT 2
- Custom Turn on Action HOT 1
- Option to use just the binary sensor to detect power status
- HomeKit not working HOT 2
- Power button switch to art mode does not work HOT 6
- How to start TV applications
- Samsung UE49K"8000 (2017 Tizen TV) sources issue HOT 1
- Full screen mp4 file in the browser
- HDMI sources gone? HOT 19
- Error retrieving proxied image HOT 2
- Can´t find SamsungTV Smart Addon HOT 2
- SmartThingsTV pypi module HOT 3
- Source State - media_input_source
- Update to the Application ID list links
- When app is running, title shows HDMI1 name HOT 2
- OSErrors when using send media key HOT 6
- State does not update properly? HOT 40
- Unsupported media type: key_ambient HOT 2
- Problems with audio mode HOT 1
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from ha-samsungtv-smart.